Showing 1–9 of 59 results
-
1/2 In. X 1/2 In. Cpvc Cts Slip Stainless Steel Mpt Adapter
$5.38 $2.96The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent…
Every item checked for quality -
KOHLER Archer 7.87 in. Vitreous China Pedestal Sink Basin in White with Overflow Drain
$127.27 $70.00The KOHLER Archer 7.87 in. Pedestal Sink Basin in White is crafted from vitreous china to offer long-term durability that is easy to maintain for a quality basin. A rear overflow is included in the design to help prevent spillage. The basin is intended for use with a pedestal base (sold separately) or a unique look in the bath or powder room.
- Vitreous china material provides added durability and is easy to clean for reduced maintenance.
- 8 in. center faucet hole spacing provides an accommodating setup.
- For use with the R2357 Archer pedestal (sold separately).
- Rear overflow helps keep water in the basin to make cleanup easy.
- Complements Archer suite of products.
Every item checked for quality -
Everbilt 1/10 HP Non-Submersible Self-Priming Transfer Pump
$109.09 $60.00The Everbilt 1/10 HP non-submersible self-priming transfer pump is designed for portable and residential applications. It can drain or remove water from window wells, clogged sinks, basements, water basins, stock tanks, boats, fish tanks, water heaters, swimming pool covers, low spots in yards, or other flooded areas. It is not approved for use in swimming pools or in salt-water marine areas.
Every item checked for quality -
Fit Rite 21-in W X 16.5-in L X 1-in H Polyester Well Pump Cover
$36.98 $20.34There are far too many other things you need to worry about so let us take care of your backflow device with the Fit-Rite II™ insulated backflow/RP cover. When used properly in combination with the proper draining and winterizing of your sprinkler system this cover will help prevent sprinkler backflow valves from freezing when the…
Every item checked for quality -
#5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve
$5.45 $3.00
Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.
- Compatible with iron pipe.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Smooth on/off flow control with a quarter turn (90°) turn of the handle.
- Easy to install.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This…
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality -
FORIOUS Matte Black Bathroom Faucet – Single Handle, 1-Hole, 6-inch
$90.91 $50.00The upper opening gives you a clear view of the flow of water in a stylish way, giving you a wonderful view of the waterfall, relax, pleasant mood. Single handle bathroom faucets design help users adjust to your preferred flow of water and the temperature easily, suitable for all kinds of bathroom styles. Lead-free brass bathroom faucet body ensures health and quality. Ceramic valve core has passed 500,000 non-leakage cycle tests, with double-layer encrypted leak-proof hose. Stability and reliability is the biggest significance of faucet. Flow Rate: 1.2 Gallons Per Minute. Multi-layer sprayed matte black bathroom faucet surface has passed 100% Acid Salt Spray Testing, non-corrosion, non-rust, anti-scratch. The classic matte black faucet makes your bathroom more elegant and solemn.
Every item checked for quality
