Hot Products

  • Potrisers Invisible Pot Feet for Containers & Statuary

    POTRISERS, made from 100-percent recycled material, were designed to be an eco-friendly, indestructible and low profile alternative to decorative pot feet, trays and trivets. While remaining hidden, POTRISERS can be fitted to heavy, pre-planted containers. Rubberized material grips surfaces while providing cushioning on hard or uneven surfaces such as wood, concrete, aggregate, compacted materials or stone. POTRISERS come in both retail and bulk packaging. Designed to protect and hide drip lines, POTRISERS allow for easy cleaning and provide crucial drainage needed for healthy plants. By floating containers off the ground, pots are less likely to freeze and crack in cold temperatures. Stack them to level planters on slopes. Suggested Use: Equally space 4 risers beneath outside edges of pot. If using with a tray – place a set below the tray to prevent water rings or condensation on surfaces, and within the tray beneath the pot to allow the pot to drain freely. POTRISERS have been field tested by the Engineering Laboratory of the University of Washington for strength and field tested for durability. This standard riser, recommended for small to medium pots and statuary, will support up to 1600-pound (per set of 4).

    Green checkmark of qualityEvery item checked for quality
    $3.98 $2.19

  • John Deere 42 in. Deck Drive Belt for Select John Deere Mowers

    When you need to replace your lawn mower belt consider the John Deere 42 in. Mower Belt for your mower. The more Kevlar cords help provide strength for your mower’s high horsepower demands. The flexible cores allow for proper routing so they stay in the pulley groove.

    • For replacing your John Deere riding mower belts.
    • Fits models: D100, D105, D110, D120, D125, D130, LA100, LA105, LA110, LA115, LA120, LA125, LA135, LA110, LA120.
    • More Kevlar cords help provide strength for high horsepower demands.
    • Belt cover provides a smooth blade and clutch engagement.
    • Reduced belt rollover in pulleys helps ensure a longer belt life.
    • GX20072 Cross-References to John Deere UC32883.
    Green checkmark of qualityEvery item checked for quality
    $55.96 $30.78

  • Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work

    This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.

    • 4 in. hole saw installation.
    • Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
    • Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
    • Sharp gripping teeth bite into ceiling joists.
    • Designed for installation without having to access attic space.
    • Includes mounting hardware and easy to follow instructions.
    Green checkmark of qualityEvery item checked for quality
    $25.00 $13.75

  • Rino-Tuff Universal Fit Weight Absorbing Flex Trimmer Strap for Grass String Trimmer, Blower or Sprayer

    The Universal Flex Strap by Rino-Tuff is a comfortable bungee trimmer strap with an adjustable shoulder pad that distributes weight evenly over your back and legs. The quick connecting clip makes it easy to attach the strap to any trimmer, blower, or sprayer. The clip houses a built-in trimmer line cutter and a slot with ear plugs. The bungee strap helps extend your reach while the thick shoulder pad absorbs the shock felt while trimming. With less weight on your body, you can trim for a longer amount of time and reduce muscle fatigue. That means cutting more with less strain to get the job done faster, leaving you more time to do the things you want.

    • Fits all trimmers, blowers, and sprayers.
    • Reduces strain and muscle fatigue.
    • Thick adjustable shoulder pad.
    • Quick and easy connecting.
    • Built-in line cutter and slot with ear plugs.
    Green checkmark of qualityEvery item checked for quality
    $14.96 $8.23
tools
54 Products
View All Items

  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75

  • Apollo 1/2 in. and 3/4 in. PEX-B SS Sleeve Tool

    The ApolloPex Combo PEX Stainless Steel Sleeve Tool is a 2-in-1 tool designed to secure 1/2 in. and 3/4 in. stainless steel sleeves (not included) into place within PEX piping systems. There are no loose components, jaws to change, or adjustments to be made to create either size connection. Connections may be checked for security using the Go/No-Go Gauge (included). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with 1/2 in. and 3/4 in. stainless steel sleeves (not included).
    • Creates a secure dual crimp at each connection.
    • Contoured, comfort-grip handles accommodate gloved and bare hands.
    • Hardened steel construction ensures reliability and durability.
    • Factory calibrated to ensure proper connections right out of the box.
    • Smooth actuation mechanism allows secure connections with minimal force required.
    • Secures sleeves into place with dual crimping action.
    Green checkmark of qualityEvery item checked for quality
    $59.38 $32.66

  • PEX-a Expansion Tool (Tool-Only)

    The Apollo ExpansionPEX Expansion Tool is a bare tool without expander heads. When combined with Apollo ExpansionPEX Expander Heads, the tool provides consistent and reliable expansion of Apollo ExpansionPEX tubing. The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed…

    Green checkmark of qualityEvery item checked for quality
    $99.98 $54.99

  • QEP Floor Demolition and Tear-Out Scraper and Stripper with Reversible Head

    The QEP 62965 Reversible Ergo-Scraper adds comfort and increases force when scraping and prying. Can be converted from 5 in. to 3 in. wide (or 5 in. to 7 in.). Ideal for scraping tight areas. Better leverage and durability. Great for removing tile, wood, laminate, stone, carpet, ice and roofing.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00
lighting
299 Products
View All Items

  • Lithonia Lighting Contractor Select GT 2 ft. x 4 ft. Integrated LED 4000 Lumens 4000K 120V Commercial Grade Recessed Troffer

    The 4 ft. long LED Troffer from Lithonia Lighting delivers general ambient lighting in applications such as schools, offices and hospitals. Long-life LEDs, coupled with energy efficient drivers, provide extended service life. Low maintenance and easy to install, this troffer works well in applications where LED is desired and budget-consciousness is needed.

    • Steel construction in gloss white.
    • 29-Watt LED; included.
    • Energy efficient LED technology allows you to save money on your energy bill.
    • 120-Volt LED.
    • Clear acrylic lens provides even light distribution.
    • 4000K (cool white).
    • Brightness: 3980 Lumens.
    Green checkmark of qualityEvery item checked for quality
    $71.47 $39.31

  • HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant

    Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.

    • Title 20 compliant, can be shipped to California locations.
    • ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
    • Includes black and white baffle attachments, extra regression for better glare control.
    • Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
    • White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
    • Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
    • 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Wet rated, can be used in shower and outdoor light applications.
    • Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
    • Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
    • E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
    • Mountable using friction blades (included).
    • Rated for use with IC and non-IC rated housings.
    • 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • Hampton Bay Less than 2 ft. 3-Light Brushed Nickel Semi-Flushmount LED Fixed Track Lighting Kit

    This 3-light track light uses simple, stylish design to function as a sharp contemporary or transitional fixture. with adjustable Integrated LED lights and a clean Brushed Nickel finish, the fixture will accent your modern decor. The multi-functional lights work great as directional accent lighting and task lighting.

    • Adjustable.
    • Dimmable.
    • Integrated LED.
    • 1200 Lumens.
    • 3000K.
    • 120-Volt.
    • 18-Watt.
    Green checkmark of qualityEvery item checked for quality
    $154.00 $84.70

  • Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount

    Original Retail Price: $33.00.

    The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.

    • Simple installation to steel mounting plate.
    • Light weight polycarbonate luminaire construction.
    • Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
    • Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
    • Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
    • Suitable for use in IC or non-IC applications.
    • Meets California title 24 JA8-2016 and is ENERGY STAR listed.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
seasonal
17 Products
View All Items

  • Handy Heater 1200-Watt Oscillating Parabolic Heater

    Introducing HANDY HEATER Heat Wave Oscillating, the parabolic space heater that concentrates soothing heat on you. The concentrated heat reflects off the curved large radiant face for instant, sun-like warmth without noisy fans. HANDY HEATER Heat Wave Oscillating is extremely powerful with 1200-Watt and 2 heating modes. The advanced ceramic technology provides incredible warmth and enables the unit to use less energy than conventional space heaters. HANDY HEATER Heat Wave Oscillating is perfect for any room in your home. Great for living rooms, bedrooms, dens, offices, dorm rooms, garages, basements, and more. Best of all, HANDY HEATER Heat Wave Oscillating is whisper quiet, allowing you to relax or sleep without being disturbed. The safety features include auto-off tip over protection and cool-touch housing. Use HANDY HEATER Heat Wave Oscillating to turn your personal space into a warm comfort zone.

    • Instant, Sun-like warmth.
    • Advanced Ceramic Technology.
    • Powerful 1200-Watt.
    • 2 heating modes.
    • Large radiant face.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater

    The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.

    • 2-heat settings.
    • BTUs: 12,285 low, 16,380 high.
    • Fully enclosed motor.
    • Space saving ceiling mounted design.
    • Fully assembled.
    • NEMA plug included.
    Green checkmark of qualityEvery item checked for quality
    $94.96 $52.23

Need Help? Contact us

    Google Reviews

    five star rating

    Nice selection at a fair price! Customer service was on point with help loading and making sure I had exactly what I needed. I’d definitely recommend this place!

    Rolan Hardley

    five star rating

    Very friendly and easy going. Excellent customer service. Levon was a great salesman and very attentive. We’ll definitely do business with them again. Thanks so much Levon for all of your help.

    Jennifer Aparicio

    five star rating

    Amazing finds, from Porcelain tile for my new bathroom to even furnishing it with a gorgeous Vanity, Mirror, storage cabinet and rods. Great variety in inside and outdoor lighting with many styles, a must to get what you need at a very reasonable price.

    Jackie Castellanos