Showing 1–9 of 58 results
-
NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub
$9.51 $5.23Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
Every item checked for quality -
Everbilt 3/4 in. Compression x 3/4 in. MIP Brass Adapter Fitting
$12.98 $7.14Use these Camco 3/4 in. x 3/4 in. brass compression fittings for evaporative coolers to create a watertight connection at the end of an evaporative cooler pipe and fitting. Measurement is 3.63 in. in width and 5.5 in. in height. No solder or adhesives are needed for installation.
- Compatible with most evaporative cooler pipes measuring 3/4 in. x 3/4 in.
- Watertight fit.
- Durable brass construction.
- Used to create a watertight connection between a pipe, fitting and evaporative cooler.
- Installs easily without solder or adhesives.
Every item checked for quality -
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
HOME-FLEX 3/4 in. IPS DR 11 Underground Yellow Poly Gas Pipe 90-Degree Elbow
$27.27 $15.00The HOME-FLEX Underground Elbow allows you to safely and easily make a 90 turn. Simply cut the pipe, slide in the provided stiffener and slide into the fitting and tighten down. No special tools necessary.
- HOME-FLEX Underground compression fitting for IPS size MDPE Yellow Poly Gas Pipe. Includes stiffeners.
- Purpose-built for direct burial outside underground use only.
- HOME-FLEX Underground pipe and fittings should NEVER be used in a building and should NEVER be used under a foundation with a structure on it.
- No special tools or equipment required to fit to compatible sized yellow poly gas pipe.
- Easy to understand, straight-forward installation.
- IAPMO UPC certified to ASTM F1924.
- Constructed of durable polypropylene for years of service.
- Rated at 125 psi.
- Can be removed and re-installed.
- NOT for use with HOME-FLEX (or other) CSST (corrugated stainless steel tubing) products.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel FPT Adapter
$6.58 $3.62The Apollo 1/2 in. CPVC x Female Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Female Threaded Transition Adapter features a female solvent weld socket and a female threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
- Compatible with CPVC pipe.
- Solvent weld slip x stainless steel female pipe thread (FPT) connection.
- Not compatible with gases or compressed air.
- Used to transition from CPVC piping system to alternative piping systems.
- NSF Listed.
- Meets UPC, IPC and cUPC standard.
Every item checked for quality -
#26, BrassCraft 1/2 in. Compression Inlet x 3/8 in. Compression Outlet Straight Valve
$5.45 $3.00
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
- Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- 1-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40°F to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality
