Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 2

Category: Plumbing

Showing 10–18 of 64 results

Filters

  • Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.

    Green checkmark of qualityEvery item checked for quality
    $25.25 $13.89

  • 2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting

    2-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.

    Green checkmark of qualityEvery item checked for quality
    $1.82 $1.00

  • Everbilt Vertical Float Switch for Sump Pumps

    Replace your sump and sewage pump switch with the Everbilt Vertical Float Switch. It’s perfect for use in small pits or basins and conveniently includes brackets and clamps for installation to the discharge pipe. The universal design makes it compatible with all models with piggyback float switches.

    • Approximately a 4 in. on/off span.
    • On/off height can be adjusted by moving rubber grommet.
    • 8 ft. cord.
    • Works with pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC.
    • 115-Volt plug attached can be removed for direct wiring.
    • Compatible with all models with piggyback float switches.
    Green checkmark of qualityEvery item checked for quality
    $42.00 $23.10

  • #63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

    • Original retail price: $10.46.
    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering to glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.

    • Connector is constructed with flexible braided polymer; stop is chrome plated brass.
    • 1/2 in. nominal push connect x 1/2 in. FIP.
    • No special installation tools required.
    • Use in hot or cold water applications.
    • Durable, flexible water connector requires no cutting or soldering during installation.
    • Compatible with copper, PEX, and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee

    The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Individually bagged.
    • Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
    • Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
    • Cold-expansion tool (sold separately) is required for installation.
    • Meets or exceeds ASTM F1960 standard.
    • Meets UPC, IPC and cUPC standard.
    • Barb x Barb x Barb connection for PEX-A plumbing systems.
    • NSF listed.
    • Rated to 200 degree F and 200 psi.
    • Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
    Green checkmark of qualityEvery item checked for quality
    $14.27 $7.85

  • Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)

    The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
    • Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
    • Pro pack includes 25 sleeves.
    • Requires expansion tool (sold separately) for use.
    • For use exclusively with PEX-A (ASTM F1960) pipe and systems.
    • Meets or exceeds ASTM F1960 and ASTM F877 standards.
    • Meets UPC, IPC and cUPC standard.
    • Rated to 200F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $16.38 $9.01

  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter

    The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel male pipe thread (MPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62

  • HOME-FLEX 3/4 in. IPS DR 11 Underground Yellow Poly Gas Pipe 90-Degree Elbow

    The HOME-FLEX Underground Elbow allows you to safely and easily make a 90 turn. Simply cut the pipe, slide in the provided stiffener and slide into the fitting and tighten down. No special tools necessary.

    • HOME-FLEX Underground compression fitting for IPS size MDPE Yellow Poly Gas Pipe. Includes stiffeners.
    • Purpose-built for direct burial outside underground use only.
    • HOME-FLEX Underground pipe and fittings should NEVER be used in a building and should NEVER be used under a foundation with a structure on it.
    • No special tools or equipment required to fit to compatible sized yellow poly gas pipe.
    • Easy to understand, straight-forward installation.
    • IAPMO UPC certified to ASTM F1924.
    • Constructed of durable polypropylene for years of service.
    • Rated at 125 psi.
    • Can be removed and re-installed.
    • NOT for use with HOME-FLEX (or other) CSST (corrugated stainless steel tubing) products.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
X