Related products

• 

  

  SharkBite Push-to-Connect Faucet Installation Kit

  The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

  Every item checked for quality

  $36.36 $20.00

  

  
• 

  

  Pfister S60-151A 2-3/4 in. Zinc Die-Cast Crown Imperial Shower Flange with Sleeve in Chrome

  Flanges provides a decorative way to cover the stems of a faucet. S60-151A Crown Imperial Shower Flange is for use with new style Pfister shower valves. 2-piece design for easier installation.

  • 2-3/4 in. O.D.
  • Chrome finish.
  • Includes set screw.
  • Tube and flange design.
  • Genuine Pfister replacement part.
  • Internal threads to mount to stem.

  Every item checked for quality

  $35.42 $19.48

  

  
• 

  

  SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 3/8 in. Compression Chrome-Plated Brass Service Stop Tee

  SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

  • Works on wet lines, rotatable after installation, and removable.
  • Push-to-connect fittings are ideal for installation in tight spaces.
  • Rated to 160 degrees Fahrenheit and 125 PSI.
  • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry.
  • Chrome-plated exterior body.
  • Low-lead DZR corrosion-resistant brass body.
  • Code approved, IAPMO listed, for details see Specifications.
  • Corrosion resistant to improve longevity.
  • Listed by IAPMO and designed and certified to ASSE 1061, ASME A112.18.1/CSA B125.1, NSF/ANSI 61 and NSF/ANSI 372 product standards.
  • Meets all UPC, IPC and cUPC requirements.
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately).
  • 1/2 in Pipe Insertion Depth = 15/16 in.

  Every item checked for quality

  $25.67 $14.12

  

  
• 

  

  BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

  

  BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

  • Compatible with PEX, copper and CPVC.
  • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
  • Installation ready: requires no special tools, soldering or glue for a watertight seal.
  • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
  • Pre-inserted tube stiffener is “installation ready” for a faster connection.
  • Easy-to-remove handle protects against accidental operation during rough-ins.
  • Chrome-plated brass.
  • Temperature rating: 40° to 160°F.
  • Pressure rating: 125 psi maximum.
  • No-lead certified.
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.

  Every item checked for quality

  $5.45 $3.00