Hot Products

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee

    The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Individually bagged.
    • Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
    • Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
    • Cold-expansion tool (sold separately) is required for installation.
    • Meets or exceeds ASTM F1960 standard.
    • Meets UPC, IPC and cUPC standard.
    • Barb x Barb x Barb connection for PEX-A plumbing systems.
    • NSF listed.
    • Rated to 200 degree F and 200 psi.
    • Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
    Green checkmark of qualityEvery item checked for quality
    $14.27 $7.85
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt

    The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.

    • Mower blade drive belt.
    • For MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Kevlar cords are durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $45.49 $25.02
  • Qep Tile Tools 10-154 Loop Pile Cutter

    Use the QEP Tile Tools 10-154 Loop Pile Cutter for your carpet cutting tasks. It features a 50-degree blade angle for cleaner smoother precise cuts. The Roberts cutter has a quick-release blade-replacement feature for fast blade changes and an extra-long nose for better row separation. The ergonomic grip provides comfort and efficiency and the cutter…

    Green checkmark of qualityEvery item checked for quality
    $16.56 $9.11
  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75
  • QEP Floor Demolition and Tear-Out Scraper and Stripper with Reversible Head

    The QEP 62965 Reversible Ergo-Scraper adds comfort and increases force when scraping and prying. Can be converted from 5 in. to 3 in. wide (or 5 in. to 7 in.). Ideal for scraping tight areas. Better leverage and durability. Great for removing tile, wood, laminate, stone, carpet, ice and roofing.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00
  • QEP 4-1/8 in. Wide Economy Knee Kicker

    The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.

    • For small installations and fixing loose carpet.
    • Tighten loose carpet like a professional.
    • Lightweight aluminum and steel construction.
    • Great for hallways and closets.
    • Features a soft, foam comfort grip handle.
    • Triple nap grip design to hold carpet firmly.
    Green checkmark of qualityEvery item checked for quality
    $45.47 $25.01
  • HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit

    The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.

    • Suitable for IC and non-IC applications.
    • 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
    • 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
    • Dimmable down to 5%.
    • Wet location listed for showers and protected ceilings.
    • ENERGY STAR.
    Green checkmark of qualityEvery item checked for quality
    $61.47 $33.81
  • Commercial Electric Ultra Slim 6 in. Adjustable CCT Canless New Construction & Remodel IC Rated Indoor/Outdoor LED Recessed Light Kit

    The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 6 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits, larger spaces and all general lighting applications.

    • SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
    • EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 6.3-inches. Trim size: 7-inches.
    • LIGHT SPECS: 65W equivalent Integrated LED using only 12W – bright 800 lumens – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – 105 degree beam angle – 50 000-hour (34 year) lifespan – Energy Star Certified.
    • WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
    • IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
    • DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
    • ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73
  • Hampton Bay 1-Light White R30/par30 Large-Step Linear Track Lighting Head

    This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton…

    Green checkmark of qualityEvery item checked for quality
    $25.40 $13.97
  • Lithonia Lighting 2SP8 G 2 U316 A12 120 GESB 2-Light White Fluorescent Ceiling Troffer

    The Lithonia Lighting 2 ft. x 2 ft. Grid 2-Light T8 Fluorescent Troffer is easily installed recessed in grid ceilings and provides general illumination for residential and commercial applications. Light-weight design with smooth hemmed sides and smooth, inward formed end flanges allow for safe handling and easy installation.

    • Energy-efficient T8 fluorescent technology.
    • Steel door frame has superior structural integrity with premium extruded appearance and flush mitered corners.
    • Steel construction is finished with a high-gloss, baked white enamel including a five-stage iron-phosphate pretreatment that ensures superior paint adhesion and rust resistance.
    • 120-Volt electronic ballast powers two 31-Watt T8 U-bent fluorescent bulbs (sold separately).
    • Suitable for installation in most 2 ft. x 2 ft. grid ceilings.
    • Integral T-bar clips secure fixture in most 2 ft. x 2 ft. grid ceilings.
    • UL listed to US safety standards.
    • A12 acrylic lens features a reverse apex pattern for superior lamp obscuration and improved visual comfort.
    Green checkmark of qualityEvery item checked for quality
    $49.47 $27.21
  • Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater

    The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.

    • 2-heat settings.
    • BTUs: 12,285 low, 16,380 high.
    • Fully enclosed motor.
    • Space saving ceiling mounted design.
    • Fully assembled.
    • NEMA plug included.
    Green checkmark of qualityEvery item checked for quality
    $94.96 $52.23
  • Handy Heater 1200-Watt Oscillating Parabolic Heater

    Introducing HANDY HEATER Heat Wave Oscillating, the parabolic space heater that concentrates soothing heat on you. The concentrated heat reflects off the curved large radiant face for instant, sun-like warmth without noisy fans. HANDY HEATER Heat Wave Oscillating is extremely powerful with 1200-Watt and 2 heating modes. The advanced ceramic technology provides incredible warmth and enables the unit to use less energy than conventional space heaters. HANDY HEATER Heat Wave Oscillating is perfect for any room in your home. Great for living rooms, bedrooms, dens, offices, dorm rooms, garages, basements, and more. Best of all, HANDY HEATER Heat Wave Oscillating is whisper quiet, allowing you to relax or sleep without being disturbed. The safety features include auto-off tip over protection and cool-touch housing. Use HANDY HEATER Heat Wave Oscillating to turn your personal space into a warm comfort zone.

    • Instant, Sun-like warmth.
    • Advanced Ceramic Technology.
    • Powerful 1200-Watt.
    • 2 heating modes.
    • Large radiant face.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

Need Help? Contact us

    Google Reviews

    five star rating

    Nice selection at a fair price! Customer service was on point with help loading and making sure I had exactly what I needed. I’d definitely recommend this place!

    Rolan Hardley

    five star rating

    Very friendly and easy going. Excellent customer service. Levon was a great salesman and very attentive. We’ll definitely do business with them again. Thanks so much Levon for all of your help.

    Jennifer Aparicio

    five star rating

    Amazing finds, from Porcelain tile for my new bathroom to even furnishing it with a gorgeous Vanity, Mirror, storage cabinet and rods. Great variety in inside and outdoor lighting with many styles, a must to get what you need at a very reasonable price.

    Jackie Castellanos