Hot Products
-
Everbilt 30/50 Low Pressure Switch For Well Pumps
$30.82 $16.95This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.
- Turns pump on at 30 psi, off at 50 psi.
- Cap removes for easy adjustment.
- Can be wired 115-Volt or 230-Volt.
- For use with submersible well or jet pumps.
- Motor wires are connected to the 2 middle posts (color does not matter).
- Breaker box wires are connected to 2 outside posts (color does not matter).
- 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
- Adjustments to springs should only be made by users with good knowledge of well systems.
- Switch shuts off pump automatically when there is a dramatic decrease in pressure.
Every item checked for quality -
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
Commercial Electric 3-Watt 150 Lumens Low-Voltage Gun Metal Motion Sensing LED Bollard
$59.96 $32.98This Upgraded Low Voltage 12-Volt Landscape Bollard has Dusk to Dawn timer and also motion sensor. Bollard will automatic turn on during low light hours (50 Lumens, eq 5-Watt) and when motion is detected within 18 ft., the bollard will brighten to 300 Lumens (eq. 25-Watt) for 5-Minutes. Commercial grade quality construction and with an elegant Gun Metal Finish for Residential use. Fully integrated LED Technology means not need to replace any bulbs. Equipped with new and improved Low voltage wire connector for easy installation.
- Bollard with 2 brightness setting active by motion.
- 3-Watt – 50 and 300 Lumens.
- Sturdy cast aluminum construction.
- Stylist gunmetal finish.
- Integrated LED technology, not bulb to replace.
- Per-wired with upgraded low voltage wire connector.
Every item checked for quality -
Everbilt Shower Mixing Valve Collar for Shower Valves and Handles
$10.47 $5.76The Everbilt waterproof mixing valve collars are designed to seal mixing shower valves to prevent leaking and mold growth. These thin, high-quality, reliable mixing valve collars are made from very strong, tear-resistant polyethylene fibers that prevents moisture from penetrating deep into walls, and offers optimum connection to tile laying materials. Thus, the Everbilt mixing valve collars provide an excellent watertight seal, are 100% waterproof, and top rated for steam shower applications. Installation is easy over smooth, shower wall surfaces as these collars can be fixed in place with modified or non-modified thin-set mortar suitable for tile or stone finishes. The package includes one mixing valve collar, and is part of the Everbilt waterproofing kit, along with the Everbilt pipe collar, Everbilt inside corners and Everbilt outside corners, sold separately. Thickness 0.1 in.
- Designed to seal mixing shower valves to prevent leaking and mold growth.
- Thin, high-quality, reliable.
- Made from very strong, tear-resistant polyethylene fibers that prevents moisture from penetrating deep into walls.
- Provides an excellent watertight seal.
- 100% Waterproof.
- Top rated for steam shower applications.
- Can be fixed in place with modified or non-modified thin-set mortar.
- Includes one piece of mixing valve collar.
- Also included in Everbilt waterproofing kit.
Every item checked for quality
-
Husky 2 in. Ratcheting PVC Cutter
$26.82 $14.75Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.
- Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
- Perfect addition to your toolbox.
- Quick-change blade mechanism.
Every item checked for quality -
RYOBI LVT/LVP Cutting Guide and Knife Kit
$20.47 $11.26Expand your RYOBI collection with the RYOBI LVT/LVP Cutting Guide and Knife Kit. This kit comes with an adjustable 18 in. Cutting Guide, Utility Knife, and three Blades, preparing you to easily score and snap your Luxury Vinyl Tile and Luxury Vinyl Plank. The Cutting Guide adjusts to various angles to provide clean and accurate cross cuts and miter cuts on LVT and LVP. The Utility Knife has an easy tool-free blade change and comes equip with on-board storage for 3 additional blades. Both have a lightweight design and hang holes to allow you to store and transport this kit wherever your project may be. This set is a consumable item and includes an adjustable 18 in. Cutting Guide, Utility Knife, and three Blades.
Every item checked for quality -
QEP 4-1/8 in. Wide Economy Knee Kicker
$45.47 $25.01The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.
- For small installations and fixing loose carpet.
- Tighten loose carpet like a professional.
- Lightweight aluminum and steel construction.
- Great for hallways and closets.
- Features a soft, foam comfort grip handle.
- Triple nap grip design to hold carpet firmly.
Every item checked for quality
-
HDX 600 Lumens Integrated LED Clamplight
$19.98 $10.99This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.
- High power SMD LED with 600 Lumens light output.
- Ultra-thin panel for saving freight, store shelves and storage places.
- With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
- Ball joint for easy positioning.
- SPT-2-8/2 in. 5 ft. cord.
- Energy saving durable on/off power switch.
- Full metal clamp with scratch-resistant vinyl sleeve.
- Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
- Heavy duty structure.
Every item checked for quality -
Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery
$79.96 $43.98The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.
- 180 Lumens.
- White sign with red lettering.
- Thermoplastic housing.
- Meets UL 924 requirements.
- Uses two 1-Watt LED light strips (included).
- Nickel-cadmium backup battery.
Every item checked for quality -
HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit
$61.47 $33.81The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.
- Suitable for IC and non-IC applications.
- 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
- 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
- Dimmable down to 5%.
- Wet location listed for showers and protected ceilings.
- ENERGY STAR.
Every item checked for quality -
Juno 75-Watt Flared Steps Satin Chrome Track Lighting Head
$26.29 $14.46The Juno Trac-Lites Flared-Step Track Light offers a contemporary shape. It provides exceptional task and accent lighting when installed on the economical Juno Trac-Lites system. The perfect blend of form, function and value, this fixture features a durable, drawn-steel housing with a high-quality satin chrome finish.
- Bulb NOT Included.
- Drawn-steel track light housing with satin chrome finish is durable and attractive.
- 90° vertical aiming capability and 358° rotation permit light-beam adjustment for virtually any task or accent lighting application.
- Spring-loaded locking latch on mounting adapter provides secure attachment of fixture to track.
- Patented, embossed polarity arrow on bottom of mounting adapter assures proper electrical connection.
Every item checked for quality
-
Handy Heater 1200-Watt Oscillating Parabolic Heater
$36.36 $20.00Introducing HANDY HEATER Heat Wave Oscillating, the parabolic space heater that concentrates soothing heat on you. The concentrated heat reflects off the curved large radiant face for instant, sun-like warmth without noisy fans. HANDY HEATER Heat Wave Oscillating is extremely powerful with 1200-Watt and 2 heating modes. The advanced ceramic technology provides incredible warmth and enables the unit to use less energy than conventional space heaters. HANDY HEATER Heat Wave Oscillating is perfect for any room in your home. Great for living rooms, bedrooms, dens, offices, dorm rooms, garages, basements, and more. Best of all, HANDY HEATER Heat Wave Oscillating is whisper quiet, allowing you to relax or sleep without being disturbed. The safety features include auto-off tip over protection and cool-touch housing. Use HANDY HEATER Heat Wave Oscillating to turn your personal space into a warm comfort zone.
- Instant, Sun-like warmth.
- Advanced Ceramic Technology.
- Powerful 1200-Watt.
- 2 heating modes.
- Large radiant face.
Every item checked for quality -
Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater
$94.96 $52.23The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.
- 2-heat settings.
- BTUs: 12,285 low, 16,380 high.
- Fully enclosed motor.
- Space saving ceiling mounted design.
- Fully assembled.
- NEMA plug included.
Every item checked for quality
Need Help? Contact us
Google Reviews
Nice selection at a fair price! Customer service was on point with help loading and making sure I had exactly what I needed. I’d definitely recommend this place!
Rolan Hardley
Very friendly and easy going. Excellent customer service. Levon was a great salesman and very attentive. We’ll definitely do business with them again. Thanks so much Levon for all of your help.
Jennifer Aparicio
Amazing finds, from Porcelain tile for my new bathroom to even furnishing it with a gorgeous Vanity, Mirror, storage cabinet and rods. Great variety in inside and outdoor lighting with many styles, a must to get what you need at a very reasonable price.