Oatey® Centro II washing machine outlet box takes up less space fitting almost anywhere for commercial and residential applications. Made of PVC it can be mounted with the valves on the top or bottom.
Oatey® Centro II washing machine outlet box takes up less space fitting almost anywhere for commercial and residential applications. Made of PVC it can be mounted with the valves on the top or bottom.
BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.
Connector is constructed with flexible braided polymer; stop is chrome plated brass.
1/2 in. nominal push connect x 1/2 in. FIP.
No special installation tools required.
Use in hot or cold water applications.
Durable, flexible water connector requires no cutting or soldering during installation.
Compatible with copper, PEX, and CPVC.
Remove with combination removal tool or 5/8 in. open end wrench.
Connector bends freely without kinking or crimping in tight quarters.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.
BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Corrugated stainless steel with corrosion resistant coating.
1/4 in. ID (3/8 in. OD).
Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
Safety+Plus2 TEFV valve helps protect against fires and explosions.
Valve has no parts that can break or misalign over time for 24/7 protection.
Connector and valve are 100% leak tested.
No special tools required for installation.
ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
Approved for indoor and outdoor use.
Temperature rating: -20°F to 150°F.
Pressure rating: 1/2 psi maximum.
ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
Very high quality brass construction.
1/2 in. diameter.
For use with HOME-FLEX CSST systems.
For use with natural gas or liquid propane.
CSA and IAPMO certified.
Not for use with Home Flex UNDERGROUND poly tubing.
HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.