Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 2

Category: Plumbing

Showing 10–18 of 52 results

Filters

  • #2, STRM005CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Pull-Out Kitchen Mixer – STRM005CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter

    The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.

    • Very high quality brass construction.
    • 1/2 in. diameter.
    • For use with HOME-FLEX CSST systems.
    • For use with natural gas or liquid propane.
    • CSA and IAPMO certified.
    • Not for use with Home Flex UNDERGROUND poly tubing.
    • HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
    • Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
    • CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
    Green checkmark of qualityEvery item checked for quality
    $10.13 $5.57

  • SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit

    The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

    • Lead free DZR brass construction for durability and reliability.
    • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
    • Innovative push-to-connect design makes for quick and easy installation.
    • Push-to-connect fittings require no solder, glue, unions, or tools.
    • Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
    • Designed for potable water distribution as well as hydronic heating applications.
    • Corrosion resistant to improve longevity.
    • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
    • Rated to 200°F and 200 psi.
    • Rated to 200°F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White

    Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.

    • Easy to use.
    • Plate clips off for easy access to the inner tank and to speedy valve.
    • Simple to clean.
    • Installation is a snap.
    • Easy to clean.
    • Actuator plate compatible with Swiss Madison dual flush systems.
    Green checkmark of qualityEvery item checked for quality
    $22.87 $12.58

  • NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing

    The NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.

    Green checkmark of qualityEvery item checked for quality
    $7.67 $4.22

  • Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $38.82 $21.35

  • Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $5.31 $2.92

  • BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.

    • 1-piece unit combines valve and supply line.
    • Saves time with one less connection.
    • No special installation tools required.
    • Installation ready with pre-inserted tube stiffener.
    • Fast, reliable and secure.
    • Compatible with copper, PEX and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00
X