Showing 37–45 of 52 results
-
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter
$6.58 $3.62The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
- Compatible with CPVC pipe.
- Solvent weld slip x stainless steel male pipe thread (MPT) connection.
- Not compatible with gases or compressed air.
- Used to transition from CPVC piping system to alternative piping systems.
- NSF Listed.
- Meets UPC, IPC and cUPC standard.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter
$10.13 $5.57The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
- Very high quality brass construction.
- 1/2 in. diameter.
- For use with HOME-FLEX CSST systems.
- For use with natural gas or liquid propane.
- CSA and IAPMO certified.
- Not for use with Home Flex UNDERGROUND poly tubing.
- HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
- Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
- CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality -
Residential Wired Main Remote Control for Tankless Gas Water Heaters
$62.07 $34.14UMC-117 main remote-control pad. Allows for easy temperature adjustment and maintenance information access. Connect up to 3 remote controls to your tankless system.
- Digital display system remote.
- Water resistant.
- 140° maximum.
- Precise temperature control 2° increments.
- for Rheem branded Tankless Gas Mid or High Efficiency water heaters.
Every item checked for quality
