Showing 46–54 of 64 results
-
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
Everbilt 0.1 HP Non-Submersible Transfer Pump
$109.09 $60.00The Everbilt portable transfer pump delivers 360 GPH at 0 ft. of lift using a 3/4 in. garden hose threaded connection. The angled inlet and outlet design keeps water lubricating the impeller and significantly increases impeller life. The clear see-through suction hose allows for easy monitoring of the pump performance to avoid running dry for an extended period of time. The brass pump body insert with reinforced high strength plastic pump housing, stainless steel motor shaft and pump cover provided corrosion free resistance. The pump is self-priming up to 9 ft. The kit includes a 6 ft. suction hose, suction strainer, and replacement impellers and brushes. 115-Volt operation.
- Patented run-dry protector increases impeller life and prevents pump body from overheating.
- Clear see-through suction hose allows for easy monitoring of water movement.
- Suction strainer filters and removes water down to 1/8 in.
- Angled design keeps water lubricating the impeller.
Every item checked for quality -
BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve
$3.64 $2.00
Original Retail Price: $17.75.
BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.
- Connector is constructed with flexible braided polymer; stop is chrome plated brass.
- 1/2 in. nominal push connect x 1/2 in. FIP.
- No special installation tools required.
- Use in hot or cold water applications.
- Durable, flexible water connector requires no cutting or soldering during installation.
- Compatible with copper, PEX, and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Multi-Function Spring Kitchen Mixer in Brushed Nickel
$272.73 $150.00- Model: K0044BN – Halo Multi-Function Spring Kitchen Mixer.
- Function: Multi-Function Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Brushed Nickel.
- Dimensions: 710 mm H x 219 mm D (27.95 in. H x 8.62 in. D)
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
SharkBite 1/2 in. Push-to-Connect x 1/2 in. Push-to-Connect x 3/8 in. Compression Chrome-Plated Brass Service Stop Tee
$25.67 $14.12SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.
- Works on wet lines, rotatable after installation, and removable.
- Push-to-connect fittings are ideal for installation in tight spaces.
- Rated to 160 degrees Fahrenheit and 125 PSI.
- Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry.
- Chrome-plated exterior body.
- Low-lead DZR corrosion-resistant brass body.
- Code approved, IAPMO listed, for details see Specifications.
- Corrosion resistant to improve longevity.
- Listed by IAPMO and designed and certified to ASSE 1061, ASME A112.18.1/CSA B125.1, NSF/ANSI 61 and NSF/ANSI 372 product standards.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately).
- 1/2 in Pipe Insertion Depth = 15/16 in.
Every item checked for quality -
KOHLER 2 in. Toilet Flush Valve Kit
$19.87 $10.93This flush valve was designed by KOHLER engineers to maintain original product performance and promote product longevity. Replace your old or leaky flush valve with an OEM KOHLER part.
- Canister flush valve kit for KOHLER cimarron toilets.
- 3 in. canister with a 2 in. base.
- Compatible with tank model numbers K-4369 and K-4418.
- Look inside the back wall of the toilet tank to identify tank model number.
- Quick connect.
- Complete assembly with tank-to-bowl gasket.
- Maximizes performance.
Every item checked for quality -
NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing
$7.67 $4.22The NIBCO 4 in. x 2 in. PVC DWV Spigot x Hub Flush Bushing can be inserted into a PVC sitting hub to reduce the hub to a smaller pipe size. The bushing is designed for use with drain, waste and vent piping systems. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
Every item checked for quality -
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality
