Category: Power & Electrical Supplies

Showing 1–9 of 65 results

Filters
  • Halex 2 in. Rigid 90-Degree Conduit Elbow

    The 2 in. 90 degree Conduit Elbow is intended for use to make a 90 degree directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.

    • Use to make a 90 degree directional change when installing rigid or IMC conduit.
    • Galvanized-steel construction.
    • Corrosion resistant.
    • For indoor or outdoor use.
    Green checkmark of qualityEvery item checked for quality
    $25.20 $13.86
  • EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Daylight (2-Pack)

    The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor 25 ft. detection range.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 5,000K (daylight).
    • California Energy Commission Title 20 Compliant LED Light Bulb.
    Green checkmark of qualityEvery item checked for quality
    $21.96 $12.08
  • 2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub

    Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.

    • Sold as: Single unit.
    • Trade Size: 2 in.
    • Insulated throat.
    • Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
    • Assembled with 150° rated insulator.
    • Oversized locknut provides vibration-proof.
    • Wet or Dry Locations.
    • Primary Material: Zinc Die Cast.
    Green checkmark of qualityEvery item checked for quality
    $21.40 $11.77
  • 1-1/4 to 3/4 Conduit Reducer

    • Fitting Type: Reducer.
    • For Conduit Type: Intermediate (IMC); Rigid.
    • Connection Type: Threaded.
    • Material: Steel.
    • Insulation: Non-Insulated.
    • Area of Application: Non-Hazardous.
    • Trade Size: 1-1/4 to 3/4.
    Green checkmark of qualityEvery item checked for quality
    $8.51 $4.68
  • OPEN BOX – Intermatic 20 Amp 24-Hour Indoor In-Wall Heavy-Duty Mechanical Timer, White

    The IW700K is a mechanical in-wall timer that replaces a standard wall switch to provide automatic control of outdoor or indoor lighting, fans, pumps, office equipment and other types of loads. It features 36 ON/OFF events per 24-hour period and captive trippers that will never fall out. For use with single pole applications. ON/AUTO/OFF override provides continuous ON or OFF positions. Wall plate included. Reliable synchronous timer motor. CSA certified. UL listed. #14 AWG color coded lead wires. Hot -Black; Switched – Red, Neutral – White. Resistive: 20 Amp, 120 VAC. Motor: 1 HP, 120 VAC.

    • Open Box – Missing Mounting Screws.
    • Original UPC: 078275143456.
    • 3-position ON/OFF/AUTO override provides continuous ON or OFF operation.
    • Reliable synchronous timer motor.
    • Multiple wall plates available.
    • Easy wiring and installation.
    • Heavy-Duty 20 A rating.
    • Requires neutral connection.
    • Perfect for use with entryway lighting, deck light controls, landscape light controls, attic fans, pumps, hallway lighting, small store lighting and more.
    Green checkmark of qualityEvery item checked for quality
    $22.27 $12.25
  • Halex #2 ACC Conduit Hanger (25-Pack)

    The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.

    • Secure and suspend 1 in. rigid and EMT conduits from overhead supports.
    • Zinc-plated steel resists corrosion.
    • Compatible with 1 in. conduit.
    • UL and CSA safety listings.
    • For indoor or outdoor applications.
    • Bolt has a square neck for easy assembly.
    Green checkmark of qualityEvery item checked for quality
    $16.98 $9.34
  • 2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings

    Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.

    • For use in Square D load centers, CSED devices and safety switches.
    • Can be used for outdoor load centers and safety switches.
    • UL and CSA listed.
    • Type B size.
    • ANSI certified.
    Green checkmark of qualityEvery item checked for quality
    $20.47 $11.26
  • EcoSmart 75-Watt Equivalent BR40 Dimmable ENERGY STAR LED Light Bulb Soft White (2-Pack)

    Upgrade your current lighting with the EcoSmart 75-Watt equivalent BR40 Dimmable Flood LED Light Bulbs. Use these bulbs to replace your traditional incandescent bulbs-with all the benefits of LED technology. Save on your energy bill every month. Rated to last for 15,000-hours and estimated to cost only $1.45 per-year to operate, these energy efficient BR40 LED light bulbs will reduce household energy costs by using 85% less energy than traditional incandescent bulbs. Using only 12-Watt to produce 945 Lumens of Soft White (2700K) light, these flood lights produce brightness equivalent to a 75-Watt incandescent light bulb. The soft white color temperature is essential in creating a relaxing, balanced feel throughout your home. It is recommended for living rooms, kitchens, bathrooms and bedrooms. Customize your lighting style with this dimmable bulb by adjusting your light from soft white to a relaxing, low light. Suitable for use in enclosed fixtures and ideal replacement bulbs for indoor recessed and track lighting. Start saving today with EcoSmart.

    • Brightness: 945 Lumens.
    • Estimated yearly energy cost: $1.45 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 13.7-year (based on 3-hours/day).
    • Light appearance: 2700K (soft white).
    • Energy used: 12-Watt (Equivalent to a 75-Watt standard incandescent bulb).
    • Energy used: 12-Watt (equivalent to a 75-Watt standard incandescent light bulb).
    • Fully dimmable with a shadow-free experience.
    • Ideal for use in totally enclosed fixture.
    • Damp locations rated.
    • LED light bulb does not contain mercury.
    • Energy efficient.
    Green checkmark of qualityEvery item checked for quality
    $10.47 $5.76
  • 1-1/2 In. Male Threaded & Socket Terminal Adapter

    Adapter ideal for adapting PVC (polyvinyl chloride) conduit to boxes, threaded fittings, and metallic systems. Male threads on 1 end, socket end on other. UL (Underwriter’s Laboratories) listed.

    Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits

    Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

    Green checkmark of qualityEvery item checked for quality
    $1.89 $1.04
X