Category: Power & Electrical Supplies

Showing 1–9 of 51 results

Filters
  • Leviton 03032-2ws 30amp White Industrial Grade Switch

    Features Amperage: 3 amps; Poles: Double Pole; Switch Type: Toggle; Product Type: Switch; Color: White; UL Listed: Yes; CSA Listed: Yes; Number of Switches: 1; Volts: 12/277 volts; Number of Settings: 2; Finish: Plastic; Operation Type: Manual; .

    Green checkmark of qualityEvery item checked for quality
    $20.80 $11.44
  • EcoSmart 65-Watt Equivalent BR30 Dimmable CEC LED Light Bulb Daylight (6-Pack)

    The BR30 LED Daylight is an indoor flood light bulb with a perfect BR30 shape to fit your indoor recessed cans or track light fixtures. Use this bulb in locations such as kitchens, living rooms or home offices. It is a perfect replacement of your traditional incandescent, CFL or halogen lamps. It only uses 9-Watt and can last up to 10 years based on a 3-hour a day usage schedule. The daylight color creates an invigorating and stimulating environment that is similar to natural daylight.

    • Brightness: 695 Lumens.
    • Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 10-year (based on 3-hours/day).
    • Light appearance: 5,000K (day light).
    • Energy used: 9-Watt (equivalent to a 65W standard incandescent light bulb).
    • Lumens per watt: 76.
    • Uses 86% less energy compared to a standard incandescent light bulb.
    • Ideal for use in recessed cans and track light fixtures.
    • Fully dimmable with a shadow-free experience, damp locations rated.
    • Contains mercury: no.
    • California Energy Commission Title 20 Compliant LED Light Bulb.
    Green checkmark of qualityEvery item checked for quality
    $18.96 $10.43
  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24
  • Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray

    With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.

    • 2-sets of on/off trippers.
    • Enables shifting electricity use into off-peak hours to reduce energy costs.
    • Convenient external override switch.
    • Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
    • Metal indoor enclosure.
    Green checkmark of qualityEvery item checked for quality
    $77.11 $42.41
  • Philips 50-Watt Equivalent Daylight 4 in. Retrofit Trim Recessed Downlight Dimmable LED Flood Light Bulb (E)*

    Easily convert your standard 4 in. recessed cans into a high-quality, energy-efficient LED flood light with the Energy Star certified Philips 10-Watt LED recessed retrofit downlight. Featuring a medium based socket adapter for easy installation, the Philips LED downlight has a white trim and provides a bright white light similar to natural light, making it ideal for general room lighting. Suitable for both wet and dry locations, this elegant, dimmable LED downlight can be used in kitchens, living rooms, bedrooms, bathroom and showers, or outdoors under a porch or eave – any place where long light and bright light is desired.

    • Brightness: 520 Lumens.
    • Estimated yearly energy cost: $1.02 (based on 3 hours/day, 11c/kWh. cost depend on rates and use).
    • Life hours: 45 years (based on 3 hours/day).
    • Light appearance: 5000K (daylight).
    • Energy used: 8.5-Watt (equivalent to a 50-Watt standard incandescent light bulb).
    • Medium based socket adapter makes installation quick and easy.
    • Features a white trim and provides a bright white light similar to natural light.
    • Ideal for use in kitchens, living rooms, bedrooms, bathroom and showers or outdoors under a porch or eave.
    • Instant on and fully dimmable.
    • UL listed for damp locations.
    • Energy star qualified.
    Green checkmark of qualityEvery item checked for quality
    $15.71 $8.64
  • Halex 3/4 in. Electrical Metallic Tube (EMT) Conduit Drive Straps (150-Pack)

    Quickly install EMT on wood or masonry with Halex 3/4 in. EMT Conduit Drive Straps (150-Pack). These zinc-plated straps can be used for outdoor jobs. They have a flat design.

    • Secures EMT conduit to a wood or masonry surface.
    • Zinc-plated steel resists corrosion.
    • UL and CSA listed.
    • For indoor or outdoor applications.
    Green checkmark of qualityEvery item checked for quality
    $24.78 $13.63
  • EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)

    The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor 25 ft. detection range.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    • California Energy Commission Title 20 Compliant LED Light Bulb.
    Green checkmark of qualityEvery item checked for quality
    $21.09 $11.60
  • Eaton CH 15 Amp All in One AF/GF Plug-On-Neutral Breaker

    Eaton’s CH Circuit Breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. Eaton’s dual purpose arc fault/ground fault (AFCI/GFCI) circuit interrupter offers both types of protection in one familiar package, provides quick installation, and a single location to easily access and identify tripped circuits. The short-body AF/GF breaker can replace or fulfill all AFCI, GFCI or AF/GF requirements in an Eaton panel. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker. Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

    • 1-pole, 15-amp, 120-volt.
    • Plug-on neutral.
    • CH type plug-on neutral dual function arc fault and ground fault breaker is compatible with CH type plug-on neutral breaker boxes.
    • Interrupt rating-10-kAIC.
    • Provides 1-device for both arc fault (AFCI) and ground fault (GFCI) protection for the entire circuit, allowing for a single point of reset.
    • Offers complete protection from AFCI and GFCI for the entire circuit, including home-runs.
    • Enables a lower installed cost versus other code-approved alternatives by using only one device to achieve both AFCI and GFCI protection.
    • Integral LED indicates different trip causes including thermal overload indication, thus reducing troubleshooting time.
    • Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation.
    • Time savings up to 25% per AFCI and GFCI installation.
    • Thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions.
    • Includes a trip flag to differentiate between a trip and the breaker being turned off.
    • Trip codes are stored permanently into the breaker’s memory, to help identify “trip” history.
    • Reduced clutter of pigtails provides a clean gutter space and professional appearance.
    • Handles are marked with on-off indication and ampere rating of the breaker.
    • Meets areas requiring AFCI protection under the 200-and all subsequent edition of the NEC.
    Green checkmark of qualityEvery item checked for quality
    $65.82 $36.20
  • Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work

    This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.

    • 4 in. hole saw installation.
    • Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
    • Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
    • Sharp gripping teeth bite into ceiling joists.
    • Designed for installation without having to access attic space.
    • Includes mounting hardware and easy to follow instructions.
    Green checkmark of qualityEvery item checked for quality
    $25.00 $13.75
X