Showing 1–9 of 54 results
-
Steel City 4 in. New Work Metal Round Electrical Outlet Box (Case of 30)
$91.35 $50.24The 6 cu. in. Round Pancake Ceiling Box offers a 35 lbs. maximum rating for mounting ceiling fans. This ceiling box features three 1/2 in. knockouts and compatibility with armored metal-clad cables. Three 1/2 in. knockouts for conduit connections.
- Model # 56111-30R.
- Drawn pre-galvanized steel construction.
- For use with armored metal-clad cable.
- 35 lbs. maximum rating for ceiling fan use.
- UL Listed.
- Meets NEC 370-17.
Every item checked for quality -
Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray
$77.11 $42.41With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
- 2-sets of on/off trippers.
- Enables shifting electricity use into off-peak hours to reduce energy costs.
- Convenient external override switch.
- Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
- Metal indoor enclosure.
Every item checked for quality -
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
T103 Mechanical Time Switch 40A 120V
$60.38 $33.21Provides direct 24 hour control of most loads, electrical loads up to 40 amps. 1 to 12 on/off operations each day with minimum on/off times of 1 hour. Manual override without changing settings. Comes with one on and one off tripper. Features Switch rating – Each pole; 40 amp resistive, 120-480 vac; 40 amp tungsten,…
Every item checked for quality -
WAGO 221-412 Wire Lever Nuts 2 Wire Conductor Compact Splicing Connectors (50-Pack)
$19.96 $10.98Pull the lever up, insert a conductor and push the lever back down – done. Tool-free and lever-actuated, WAGO’s 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-wire, 3-wire and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly – and without tools. While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed – 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.
- Time savings for installers and device manufacturers.
- Mounting carrier for installation conforms to standards.
- Safely install long cable runs with larger conductor cross sections.
- Custom carriers are possible.
Every item checked for quality -
Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work
$25.00 $13.75This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.
- 4 in. hole saw installation.
- Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
- Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
- Sharp gripping teeth bite into ceiling joists.
- Designed for installation without having to access attic space.
- Includes mounting hardware and easy to follow instructions.
Every item checked for quality -
Halex 3 in. Rigid Conduit Coupling
$14.20 $7.81Extend a run of conduit with the Halex 3 in. Rigid or IMC Conduit Coupling. This galvanized fitting is female-threaded. It can be used indoors or outdoors.
- Joins 2 lengths of threaded rigid or IMC conduit.
- Galvanized steel resists corrosion.
- UL listed.
- For indoor or outdoor applications.
Every item checked for quality -
Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)
$24.87 $13.68The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.
- For indoor use.
- Made of zinc.
- Compatible with EMT conduit.
- Meets UL and cULus requirements.
Every item checked for quality
