Category: Power & Electrical Supplies

Showing 28–36 of 51 results

Filters
  • Intermatic 15 Amp 24-Hour Indoor Plug-In Timer, White

    The TN311 Series provides a quick and easy way to automate ON/OFF schedules and plugs directly into standard wall outlets. Simply set the on/off trippers into the desired time slots, and then plug the light into the timer and the timer into the wall outlet. Includes 3 On/3 Off trippers.

    • 3 ON/3 OFF settings per day with removable trippers, more ON/OFF events with addition of extra trippers.
    • Minimum 30-min ON/OFF time.
    • Grounded receptacle and 3-prong plug.
    • Plugs directly into wall outlet.
    • Perfect for use with lamps, electronics, chargers, appliances, window air conditioning, heaters, fans and more.
    Green checkmark of qualityEvery item checked for quality
    $17.98 $9.89
  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24
  • Halex 3 in. Rigid Conduit Coupling

    Extend a run of conduit with the Halex 3 in. Rigid or IMC Conduit Coupling. This galvanized fitting is female-threaded. It can be used indoors or outdoors.

    • Joins 2 lengths of threaded rigid or IMC conduit.
    • Galvanized steel resists corrosion.
    • UL listed.
    • For indoor or outdoor applications.
    Green checkmark of qualityEvery item checked for quality
    $14.20 $7.81
  • Commercial Electric 1-1/2 in. x 108 ft. Heavy Duty Tape, Black

    Heavy duty, pressure sensitive vinyl tape of 10mil thickness. It’s used for all types of mechanical and electrical applications. It’s flame retardant and can be used as primary insulation for splices at not more than 600-Volt.

    • Quicker buildups and added abrasion protection.
    • Flame retardant.
    • Resistant to sun, water, oil, acids, alkalis, corrosive chemicals.
    • Lead free.
    Green checkmark of qualityEvery item checked for quality
    $18.98 $10.44
  • Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector

    With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.

    • 6-outlet.
    • 8 ft. 14-Gauge cord.
    • 1500-jouels.
    Green checkmark of qualityEvery item checked for quality
    $34.64 $19.05
  • Eaton CH 15 Amp All in One AF/GF Plug-On-Neutral Breaker

    Eaton’s CH Circuit Breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. Eaton’s dual purpose arc fault/ground fault (AFCI/GFCI) circuit interrupter offers both types of protection in one familiar package, provides quick installation, and a single location to easily access and identify tripped circuits. The short-body AF/GF breaker can replace or fulfill all AFCI, GFCI or AF/GF requirements in an Eaton panel. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker. Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.

    • 1-pole, 15-amp, 120-volt.
    • Plug-on neutral.
    • CH type plug-on neutral dual function arc fault and ground fault breaker is compatible with CH type plug-on neutral breaker boxes.
    • Interrupt rating-10-kAIC.
    • Provides 1-device for both arc fault (AFCI) and ground fault (GFCI) protection for the entire circuit, allowing for a single point of reset.
    • Offers complete protection from AFCI and GFCI for the entire circuit, including home-runs.
    • Enables a lower installed cost versus other code-approved alternatives by using only one device to achieve both AFCI and GFCI protection.
    • Integral LED indicates different trip causes including thermal overload indication, thus reducing troubleshooting time.
    • Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation.
    • Time savings up to 25% per AFCI and GFCI installation.
    • Thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions.
    • Includes a trip flag to differentiate between a trip and the breaker being turned off.
    • Trip codes are stored permanently into the breaker’s memory, to help identify “trip” history.
    • Reduced clutter of pigtails provides a clean gutter space and professional appearance.
    • Handles are marked with on-off indication and ampere rating of the breaker.
    • Meets areas requiring AFCI protection under the 200-and all subsequent edition of the NEC.
    Green checkmark of qualityEvery item checked for quality
    $65.82 $36.20
  • Defiant Wired 16VAC/30VA Doorbell Transformer, Compatible with all Video Doorbells

    This Defiant Branded Wired 30VA Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design that is perfect for most wired doorbell installations. This 30VA transformer is compatible with smart video doorbells, Wi-Fi smart devices and more. ETL Certified to guarantee safety and quality.

    • Use to replace outdated or broken transformers.
    • Combine with your favorite wired chime and push button.
    • Perfect for homes with or without an existing doorbell.
    • Lock nut type.
    • Input: 120-Volt AC.
    • Output: 16-vac/30-va.
    • Works with any wired door chime.
    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98
  • T103 Mechanical Time Switch 40A 120V

    Provides direct 24 hour control of most loads, electrical loads up to 40 amps. 1 to 12 on/off operations each day with minimum on/off times of 1 hour. Manual override without changing settings. Comes with one on and one off tripper. Features Switch rating – Each pole; 40 amp resistive, 120-480 vac; 40 amp tungsten,…

    Green checkmark of qualityEvery item checked for quality
    $60.38 $33.21
  • Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work

    This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.

    • 4 in. hole saw installation.
    • Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
    • Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
    • Sharp gripping teeth bite into ceiling joists.
    • Designed for installation without having to access attic space.
    • Includes mounting hardware and easy to follow instructions.
    Green checkmark of qualityEvery item checked for quality
    $25.00 $13.75
X