Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
    2. Page 4

Category: Power & Electrical Supplies

Showing 28–36 of 65 results

Filters

  • 2 in. PVC Fitting – Meter Offset (Standard Fitting)

    The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.

    • Brings electrical service into a meter box.
    • Non-metallic PVC is heat, fire and corrosion resistant.
    • Compatible with sch. 40 or sch. 80 conduit.
    • Ridges on the outside for concrete encasement.
    • UL Listed for safety and peace of mind.
    • Socket on 1 end with threads on offset for easy installation.
    Green checkmark of qualityEvery item checked for quality
    $5.35 $2.94

  • 1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow

    The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.

    • Enables a 90 degree change of direction in a run of EMT conduit.
    • Made of galvanized steel for corrosion resistance.
    • UL and CSA Listed.
    • Large radius allows for easy wire pulling.
    Green checkmark of qualityEvery item checked for quality
    $12.27 $6.75

  • 1/2 in. PVC Male Adapter

    PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.

    • Can be used to join RIGID non-metallic conduit (RNC).
    • Compatible with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC).
    • For use in aboveground and underground applications as well as exposed outdoor usage.
    • Durable PVC construction means no rusting or corroding.
    • Weighing less than metallic systems means more efficient and quicker installation time.
    • UL listed.
    Green checkmark of qualityEvery item checked for quality
    $0.55 $0.30

  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • Halex 3 in. Rigid Conduit Coupling

    Extend a run of conduit with the Halex 3 in. Rigid or IMC Conduit Coupling. This galvanized fitting is female-threaded. It can be used indoors or outdoors.

    • Joins 2 lengths of threaded rigid or IMC conduit.
    • Galvanized steel resists corrosion.
    • UL listed.
    • For indoor or outdoor applications.
    Green checkmark of qualityEvery item checked for quality
    $14.20 $7.81

  • Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)

    Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.

    • Model # 2G4D1234-10R.
    • Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
    • Zinc-galvanized steel is rust- and corrosion resistant.
    • Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
    • UL Listed.
    • 17 knockouts for use with 1/2 in. and 3/4 in. connections.
    Green checkmark of qualityEvery item checked for quality
    $65.29 $35.91

  • THOMAS & BETTS 5-Pack 3/8-Inch Spring Nut ZA1003/8EG-10

    Self-aligning spring nuts provide easy fastening for all A-Series struts and inserts. 5 per pack. Nut Size 3/8 In. Type Self-Aligning Strut and Insert Series A-Series pack of 10.

    Green checkmark of qualityEvery item checked for quality
    $5.49 $3.02

  • 2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub

    Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.

    • Sold as: Single unit.
    • Trade Size: 2 in.
    • Insulated throat.
    • Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
    • Assembled with 150° rated insulator.
    • Oversized locknut provides vibration-proof.
    • Wet or Dry Locations.
    • Primary Material: Zinc Die Cast.
    Green checkmark of qualityEvery item checked for quality
    $21.40 $11.77

  • KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)

    The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93
X