Showing 37–45 of 51 results
-
Intermatic T100 Series 40 Amp 208-277V DPST 24 Hour Mechanical Time Switch Mechanism
$79.98 $43.99The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
- Direct 24-hour control of most loads.
- Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour.
- Manual override.
- One ON and one OFF tripper included.
- Mechanism only.
- Perfect for use with indoor/outdoor lighting, signs, filters, electric fences, fans, conveyors, pool heaters, blowers, pumps and more.
Every item checked for quality -
Defiant Wired 16VAC/30VA Doorbell Transformer, Compatible with all Video Doorbells
$19.96 $10.98This Defiant Branded Wired 30VA Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design that is perfect for most wired doorbell installations. This 30VA transformer is compatible with smart video doorbells, Wi-Fi smart devices and more. ETL Certified to guarantee safety and quality.
- Use to replace outdated or broken transformers.
- Combine with your favorite wired chime and push button.
- Perfect for homes with or without an existing doorbell.
- Lock nut type.
- Input: 120-Volt AC.
- Output: 16-vac/30-va.
- Works with any wired door chime.
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Daylight (2-Pack)
$21.96 $12.08The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 5,000K (daylight).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
Eaton CH 15 Amp All in One AF/GF Plug-On-Neutral Breaker
$65.82 $36.20Eaton’s CH Circuit Breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. Eaton’s dual purpose arc fault/ground fault (AFCI/GFCI) circuit interrupter offers both types of protection in one familiar package, provides quick installation, and a single location to easily access and identify tripped circuits. The short-body AF/GF breaker can replace or fulfill all AFCI, GFCI or AF/GF requirements in an Eaton panel. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker. Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.
- 1-pole, 15-amp, 120-volt.
- Plug-on neutral.
- CH type plug-on neutral dual function arc fault and ground fault breaker is compatible with CH type plug-on neutral breaker boxes.
- Interrupt rating-10-kAIC.
- Provides 1-device for both arc fault (AFCI) and ground fault (GFCI) protection for the entire circuit, allowing for a single point of reset.
- Offers complete protection from AFCI and GFCI for the entire circuit, including home-runs.
- Enables a lower installed cost versus other code-approved alternatives by using only one device to achieve both AFCI and GFCI protection.
- Integral LED indicates different trip causes including thermal overload indication, thus reducing troubleshooting time.
- Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation.
- Time savings up to 25% per AFCI and GFCI installation.
- Thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions.
- Includes a trip flag to differentiate between a trip and the breaker being turned off.
- Trip codes are stored permanently into the breaker’s memory, to help identify “trip” history.
- Reduced clutter of pigtails provides a clean gutter space and professional appearance.
- Handles are marked with on-off indication and ampere rating of the breaker.
- Meets areas requiring AFCI protection under the 200-and all subsequent edition of the NEC.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 8 in. x 8 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$59.98 $32.99WIEGMANN 8 In. x 8 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC080804RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
Commercial Electric Easy-Up 4 In. D Baffle Color Selectable Canless Led Recessed Kit
$24.96 $13.73Skip the can-no installation of recessed housings anymore, Commercial Electric LED Easy Up lights are LED powered recessed downlights with a Junction box on the back for direct wiring. Wire directly from the ceiling into the fixture. The spring loaded clips on the side clamp the light to the ceiling drywall. Easy Up is the…
Every item checked for quality -
Commercial Electric 1-1/2 in. x 108 ft. Heavy Duty Tape, Black
$18.98 $10.44Heavy duty, pressure sensitive vinyl tape of 10mil thickness. It’s used for all types of mechanical and electrical applications. It’s flame retardant and can be used as primary insulation for splices at not more than 600-Volt.
- Quicker buildups and added abrasion protection.
- Flame retardant.
- Resistant to sun, water, oil, acids, alkalis, corrosive chemicals.
- Lead free.
Every item checked for quality -
Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work
$25.00 $13.75This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.
- 4 in. hole saw installation.
- Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
- Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
- Sharp gripping teeth bite into ceiling joists.
- Designed for installation without having to access attic space.
- Includes mounting hardware and easy to follow instructions.
Every item checked for quality -
Halex 3 in. Rigid Conduit Coupling
$14.20 $7.81Extend a run of conduit with the Halex 3 in. Rigid or IMC Conduit Coupling. This galvanized fitting is female-threaded. It can be used indoors or outdoors.
- Joins 2 lengths of threaded rigid or IMC conduit.
- Galvanized steel resists corrosion.
- UL listed.
- For indoor or outdoor applications.
Every item checked for quality
