Showing 46–54 of 58 results
-
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)
$21.09 $11.60The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)
$65.29 $35.91Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.
- Model # 2G4D1234-10R.
- Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
- Zinc-galvanized steel is rust- and corrosion resistant.
- Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
- UL Listed.
- 17 knockouts for use with 1/2 in. and 3/4 in. connections.
Every item checked for quality -
Husky 50 Ft. 16/2 Indoor/Outdoor Extension Cord, Green, Lime Green
$16.49 $9.07This Husky 50 ft. 16/2 Extension Cord is versatile for indoor/outdoor job sites and household use. Rated for 13 Amp and 125-Volt. Reinforced blades and molded plugs prevent accidental bending and breaking. cULus Listed. Medium-duty, Durable and Flexible. Color: Lime Green.
Every item checked for quality -
BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid
$14.98 $8.24Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.
- Model # 5043-0.
- Rugged die-cast aluminum construction.
- State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
- Installation hardware, gasket and multilingual instructions included.
- Toggle and GFCI.
- Vertical mount.
- NEMA 3R rated.
Every item checked for quality -
Defiant 15 Amp In-Wall 3-Way Daylight Adjusting Digital Timer Switch with Screw Terminals, White
$27.98 $15.39Your switch does the work for you with the Defiant 7-Day In-Wall Digital Timer. By supporting up to seven ON/OFF schedules, the timer is ideal for varied routines. A seven-day cycle allows different schedules based on the day of the week. It provides simple, convenient automation for your hardwired lighting in single-pole or three-way installations. For increased versatility, the timer works with LED, CFL, incandescent and halogen bulbs, which is perfect for porch lighting, ceiling lights, seasonal decor and more. In addition to custom ON/OFF programs, dusk and dawn settings enhance scheduling options. The random feature fluctuates programmed times by up to 30 minutes to create a lived-in appearance. A countdown function automatically turns off lights after a desired period. Built-in self-adjusting technology automatically recognizes the sunrise and sunset times for your region and makes the appropriate adjustment to your lighting settings. The timer features a replaceable door to conceal the buttons and includes white and light almond doors to match your existing rocker-style switches – wallplate not included. It also serves as an ON/OFF switch when closed. Home automation is even more automatic with the Defiant 7-Day In-Wall Digital Timer.
- Self-adjusting technology – Built-in technology automatically adjust lighting times based on sunrise and sunset in your region and accounts for daylight saving time changes.
- Weekly programming – 7-day cycle provides consistent control with the ability to vary schedules based on the day of the week.
- Switch upgrade – Replaces single-pole or three-way switches to control LED, CFL, incandescent and halogen bulbs, and other fixtures – neutral wire required.
- Replaceable door – Convenient door in white and light almond conceals programming buttons and functions as ON/OFF switch.
- Digital display – Large LCD screen offers easy viewing of settings and time.
Every item checked for quality -
Halex 3/4 in. Electrical Metallic Tube (EMT) Conduit Drive Straps (150-Pack)
$24.78 $13.63Quickly install EMT on wood or masonry with Halex 3/4 in. EMT Conduit Drive Straps (150-Pack). These zinc-plated straps can be used for outdoor jobs. They have a flat design.
- Secures EMT conduit to a wood or masonry surface.
- Zinc-plated steel resists corrosion.
- UL and CSA listed.
- For indoor or outdoor applications.
Every item checked for quality -
WAGO 221-412 Wire Lever Nuts 2 Wire Conductor Compact Splicing Connectors (50-Pack)
$19.96 $10.98Pull the lever up, insert a conductor and push the lever back down – done. Tool-free and lever-actuated, WAGO’s 221 Series wire splicing connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors of different cross sections using 2-wire, 3-wire and 5-wire connectors. These connectors are available in 2 variants which accommodate 24-12 AWG and 20-10 AWG wire. Opening the levers on the 221 Series requires little effort. This means that you can connect conductors quickly – and without tools. While connecting the conductor, recessed handles on the sides ensure an easy, secure grip on the connector. For peace of mind, you can test the voltage from either side of the connector even when installed – 1 test point is in the conductor entry direction and the other is on the opposite side. This accessibility provides extremely convenient testing conditions, for a wide range of applications. In addition, mounting carriers are available for every 221 Series splicing connector. Each variant can be mounted vertically or horizontally. Simply secure the carrier by snapping it onto the DIN-rail or with screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. 1 test slot is always accessible to ensure compliance with VDE standards.
- Time savings for installers and device manufacturers.
- Mounting carrier for installation conforms to standards.
- Safely install long cable runs with larger conductor cross sections.
- Custom carriers are possible.
Every item checked for quality -
Commercial Electric 4 in. Round 2-1/8 in. Deep 21.5 cu. in. Metallic Ceiling Fan/Light Fixture Box and Brace Kit for Old/New Work
$25.00 $13.75This 21.5 cu. in. new or remodel ceiling fan brace with a 2-1/8 in. box allows you to safely install your ceiling fan or lighting fixture without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4 in. hole. This brace works with all ceiling fans, so you do not have to worry about size or compatibility. The brace’s multiple teeth easily insert and lock into the ceiling joists, its threaded twin-lead screw adjusts quickly and its hex tube allows for easy turning. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 in. and 24 in. wide. The Ceiling Fan Brace comes with everything you need for installation, including easy to follow instructions. UL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less.
- 4 in. hole saw installation.
- Energy efficient round design includes 5 knockouts for conduit or NM cable and includes 1 NM cable connector.
- Compatible with most fans and fixtures, with both 10-24 and 8-32 threads.
- Sharp gripping teeth bite into ceiling joists.
- Designed for installation without having to access attic space.
- Includes mounting hardware and easy to follow instructions.
Every item checked for quality -
Defiant Wired Doorbell Tri-Volt Transformer
$29.98 $16.49This Defiant Branded Tri-Volt Wired Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design with 3 options for electrical output: 8-Volt AC/10-Volt A, 16-Volt AC/10-Volt A or 24-Volt AC/20 VA. The transformer secures to knockout hole in junction box with included lock nut clamp.
- Tri-volt/clamp-on type.
- Input: 120-Volt AC.
- Output: 8-vac/10-va, 16-vac/10-va or 24-vac/20-va.
- Works with any wired door chime.
Every item checked for quality
