Related products

• 

  

  Everbilt 30/50 Low Pressure Switch For Well Pumps

  This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

  • Turns pump on at 30 psi, off at 50 psi.
  • Cap removes for easy adjustment.
  • Can be wired 115-Volt or 230-Volt.
  • For use with submersible well or jet pumps.
  • Motor wires are connected to the 2 middle posts (color does not matter).
  • Breaker box wires are connected to 2 outside posts (color does not matter).
  • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
  • Adjustments to springs should only be made by users with good knowledge of well systems.
  • Switch shuts off pump automatically when there is a dramatic decrease in pressure.

  Every item checked for quality

  $30.82 $16.95

  

  
• 

  

  BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

  BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

  • Corrugated stainless steel with corrosion resistant coating.
  • 1/4 in. ID (3/8 in. OD).
  • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
  • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
  • Safety+Plus2 TEFV valve helps protect against fires and explosions.
  • Valve has no parts that can break or misalign over time for 24/7 protection.
  • Connector and valve are 100% leak tested.
  • No special tools required for installation.
  • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
  • Approved for indoor and outdoor use.
  • Temperature rating: -20°F to 150°F.
  • Pressure rating: 1/2 psi maximum.
  • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
  • Designed, machined and assembled in the USA.

  Every item checked for quality

  $27.27 $15.00

  

  
• 

  

  #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

  

  The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

  • Compatible with iron pipe.
  • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
  • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
  • Easy-to-remove handle protects against accidental operation during rough-ins.
  • One-piece body construction for strength, durability and long-lasting performance.
  • Chrome-plated brass.
  • Temperature rating: 40 degrees to 160 degrees F.
  • Pressure rating: 125 PSI maximum.
  • No-lead certified.
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.

  Every item checked for quality

  $5.45 $3.00

  

  
• 

  

  SharkBite Push-to-Connect Faucet Installation Kit

  The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

  Every item checked for quality

  $36.36 $20.00