Features For use with Apollo PEX pipe. Quick and easy no mess connections. No flames glues fluxes or solvents needed. Adapter Fpt Swivel Size – 3/4 x 3/4 in. – SKU: ORGL84439.
Features For use with Apollo PEX pipe. Quick and easy no mess connections. No flames glues fluxes or solvents needed. Adapter Fpt Swivel Size – 3/4 x 3/4 in. – SKU: ORGL84439.
This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.
Turns pump on at 30 psi, off at 50 psi.
Cap removes for easy adjustment.
Can be wired 115-Volt or 230-Volt.
For use with submersible well or jet pumps.
Motor wires are connected to the 2 middle posts (color does not matter).
Breaker box wires are connected to 2 outside posts (color does not matter).
2-spring design allows for adjustment of cut-in and cut-out pressure settings.
Adjustments to springs should only be made by users with good knowledge of well systems.
Switch shuts off pump automatically when there is a dramatic decrease in pressure.
This universal side spray adds convenience for cleaning at the sink. The universal design fits a MOEN threaded connection or Quick Connect design. The chrome finish complements any decor.
The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
Compatible with CPVC pipe.
Solvent weld slip x stainless steel male pipe thread (MPT) connection.
Not compatible with gases or compressed air.
Used to transition from CPVC piping system to alternative piping systems.