Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Everbilt 4.5 gal. Thermal Expansion Tank

Everbilt 4.5 gal. Thermal Expansion Tank

Everbilt 4.5 gal. Thermal Expansion Tank

Built with heavy-duty butyl diaphragm system to absorb the expansion of water volume and help prevent dangerous pressure build-up. This Everbilt Expansion Tank will absorb pressure increases when properly installed on your closed water system. Most local codes now require an Expansion Tank on residential closed water systems. Water pressure over 80 psi can shorten the life of your water system and appliances.

  • Stainless steel 3/4 in. MIP with hex.
  • Factory pre-charged at 40 psi.
  • Certified with cUPC and NSF 61 compliant.
  • Brass air charging port with O-ring seal.
  • 16-Gauge cold rolled steel shell.
  • High quality coating prevents corrosion.
  • 100% butyl rubber diaphragm lined with polypropylene.
  • Maximum pressure of 150 psi.
  • Maximum temperature rating of 200 degree F.
  • Protects water heater, fixtures and appliances.
Green checkmark of qualityEvery item checked for quality

$59.93 $32.96

Out of stock

SKU: 883882104406 Category: Tags: , , ,

Description

Built with heavy-duty butyl diaphragm system to absorb the expansion of water volume and help prevent dangerous pressure build-up. This Everbilt Expansion Tank will absorb pressure increases when properly installed on your closed water system. Most local codes now require an Expansion Tank on residential closed water systems. Water pressure over 80 psi can shorten the life of your water system and appliances.

  • Stainless steel 3/4 in. MIP with hex.
  • Factory pre-charged at 40 psi.
  • Certified with cUPC and NSF 61 compliant.
  • Brass air charging port with O-ring seal.
  • 16-Gauge cold rolled steel shell.
  • High quality coating prevents corrosion.
  • 100% butyl rubber diaphragm lined with polypropylene.
  • Maximum pressure of 150 psi.
  • Maximum temperature rating of 200 degree F.
  • Protects water heater, fixtures and appliances.

Additional information

Weight 11 lbs
Dimensions 11 × 11 × 16 in

Related products

  • BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.

    • Connector is constructed with flexible braided polymer; stop is chrome plated brass.
    • 1/2 in. nominal push connect x 1/2 in. FIP.
    • No special installation tools required.
    • Use in hot or cold water applications.
    • Durable, flexible water connector requires no cutting or soldering during installation.
    • Compatible with copper, PEX, and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter

    The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel male pipe thread (MPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62

  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
X