Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Oatey 38528-38532 Outlet Box Wash Mach .5 in. Pex

Oatey 38528-38532 Outlet Box Wash Mach .5 in. Pex

Oatey 38528-38532 Outlet Box Wash Mach .5 in. Pex

Box made of high impact high impact polystyrene. Versatile design allows for right left or center drain and bottom or top mount valves. Lock and Load valve mounting system for quick and easy positioning. Single lever valve mounting hub locks into position in seconds. Easily installed and removed test cap that does not fall into…

Green checkmark of qualityEvery item checked for quality

$29.55 $16.25

Out of stock

SKU: 038753385280 Category:

Description

Box made of high impact high impact polystyrene. Versatile design allows for right left or center drain and bottom or top mount valves. Lock and Load valve mounting system for quick and easy positioning. Single lever valve mounting hub locks into position in seconds. Easily installed and removed test cap that does not fall into drain. 2 drain opening fits PVC or ABS schedule 40 DWV pipe. 1/4 turn brass ball valve – PEX.Features Top or Bottom Valve Mount. Snap-on Faceplate Frame accommodates up to 1 in. drywall. Easy to remove knockout Patent Pending Hammer Valves. 4 support brackets included for mounting. Dimension – 12.5 x 22.5 x 23.25 in. Item Weight – 1.7 lbs. – SKU: ORGL15198.

Additional information

Weight 3 lbs
Dimensions 4 × 12 × 10 in

Related products

  • MOEN Universal Kitchen Faucet Side Spray in Chrome

    This universal side spray adds convenience for cleaning at the sink. The universal design fits a MOEN threaded connection or Quick Connect design. The chrome finish complements any decor.

    Green checkmark of qualityEvery item checked for quality
    $29.96 $16.48

  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter

    The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel male pipe thread (MPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62

  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel FPT Adapter

    The Apollo 1/2 in. CPVC x Female Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Female Threaded Transition Adapter features a female solvent weld socket and a female threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel female pipe thread (FPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62

  • Everbilt 30/50 Low Pressure Switch For Well Pumps

    This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

    • Turns pump on at 30 psi, off at 50 psi.
    • Cap removes for easy adjustment.
    • Can be wired 115-Volt or 230-Volt.
    • For use with submersible well or jet pumps.
    • Motor wires are connected to the 2 middle posts (color does not matter).
    • Breaker box wires are connected to 2 outside posts (color does not matter).
    • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
    • Adjustments to springs should only be made by users with good knowledge of well systems.
    • Switch shuts off pump automatically when there is a dramatic decrease in pressure.
    Green checkmark of qualityEvery item checked for quality
    $30.82 $16.95
X