• BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • 1″ PVC Coupling Male Terminal Adapter

    Lightweight yet offers high impact and tensile strength. Chemical resistant to a wide range of acids, alkalis or salt solutions. Corrosion resistant for lower maintenance cost and longer life. PVC is nonconductive eliminating dangerous second point of contact.

    • Brand: Kraloy Fittings.
    • Part Number: TA10.
    • KSCdirect Part: Coup 1.
    • Description: 1 Conduit Coup.
    Green checkmark of qualityEvery item checked for quality
    $1.15 $0.63
  • NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub

    Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.

    Green checkmark of qualityEvery item checked for quality
    $9.51 $5.23
  • #2, STRM005CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Pull-Out Kitchen Mixer – STRM005CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00
  • Hampton Bay Kenmont 4 ft. 4-Light Brushed Nickel Integrated LED Wave Fixed Track Lighting Kit

    This 4-light fixed track offers a modern style in a brushed nickel finish. The unique design of the movable head gives an immaculate LED light output. The stylish design will add a sophisticated look to any home.

    • Brushed nickel finish for corrosion resistance.
    • Integrated 3000K warm white LED, no bulbs to replace.
    • Adjustable lamp heads to direct light.
    • Only uses 12-Watt of power.
    • Light output of 1600 Lumens.
    • Dimmable.
    • 120-Volt.
    Green checkmark of qualityEvery item checked for quality
    $159.00 $87.45
  • Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater

    The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.

    • 2-heat settings.
    • BTUs: 12,285 low, 16,380 high.
    • Fully enclosed motor.
    • Space saving ceiling mounted design.
    • Fully assembled.
    • NEMA plug included.
    Green checkmark of qualityEvery item checked for quality
    $94.96 $52.23
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt

    The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.

    • Mower blade drive belt.
    • For MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Kevlar cords are durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $45.49 $25.02
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Cadet Double-pole 15 Amp Line Voltage 120/240-volt TEP Series 5-2 Day Electronic Programmable Thermostat in White

    Save on your home heating bill with the precise technology of this programmable electronic thermostat. Features include touchscreen controls, a large and easy-to-read backlit display, four daily setting options, and more. This line voltage thermostat is compatible with fan-forced in-wall electric heaters, electric baseboard heaters, and with linear and panel convector heaters as well.

    • Lower your heating costs with precise temperature control within one degree and simple electronic controls to manage usage.
    • Line voltage thermostat compatible with in-wall and baseboard electric heaters (120/208/240-Volt).
    • Simple 4-wire installation (double-pole) and includes an off setting.
    • 5-2 day programming, with 4 daily events and 4 quick modes, including early start, vacation, comfort and economy.
    • Tamperproof your program settings with a security lock.
    • Choose temperature display in Celsius or Fahrenheit.
    • 15 Amp.
    • UL listed in the US and Canada for safety compliance.
    Green checkmark of qualityEvery item checked for quality
    $68.91 $37.90
  • Good Vibrations Weight Absorbing Trimmer Strap (Bungee)

    Good Vibrations Zero-Gravity Trimmer Shoulder Strap uses Bungee Pro-X technology to absorb the weight of the Trimmer, and relieves the tension in your shoulders, back and arms. It is ideal for all string trimmers, gas or electric, commercial or household use. Quick connect features attaches to trimmer in seconds.

    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98
  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00