-
Husky 1-1/2 in. Quick-Release Telescoping Basin Wrench
$19.98 $10.99Husky s Quick Release Telescoping Plumbing Basin Wrench is ideal for tightening and removing faucet and fill valve nuts. It features a versatile multi-position telescoping range of 12-1/2 in. up to 19 in. for hard to reach valves. It also features an extra-large spring-loaded jaw with a capacity of 3/8 in. up to 1-1/2 in.…
Every item checked for quality -
Everbilt 0.1 HP Non-Submersible Transfer Pump
$109.09 $60.00The Everbilt portable transfer pump delivers 360 GPH at 0 ft. of lift using a 3/4 in. garden hose threaded connection. The angled inlet and outlet design keeps water lubricating the impeller and significantly increases impeller life. The clear see-through suction hose allows for easy monitoring of the pump performance to avoid running dry for an extended period of time. The brass pump body insert with reinforced high strength plastic pump housing, stainless steel motor shaft and pump cover provided corrosion free resistance. The pump is self-priming up to 9 ft. The kit includes a 6 ft. suction hose, suction strainer, and replacement impellers and brushes. 115-Volt operation.
- Patented run-dry protector increases impeller life and prevents pump body from overheating.
- Clear see-through suction hose allows for easy monitoring of water movement.
- Suction strainer filters and removes water down to 1/8 in.
- Angled design keeps water lubricating the impeller.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Orbit 3/4 in. Automatic Converter Valve
$24.96 $13.73The automatic converter valve allows you to transform an existing manual valve into a fully automatic valve. The converter valve fits the threads in most makes of manual valves, including manual anti-siphon valves. Brass threads ensure reliable installation and high durability. The valve features a 24 VAC solenoid, manual actuation lever, bleed screw, and flow control. In cases where there is no existing sprinkler wire running to the valve, the Orbit battery-powered controller provides a simple way to power up to four valves in a single location. The automatic converter valve is compatible with all major brands of 24 VAC irrigation controllers. We recommend B-hyve controllers for optimum water conservation and PVC-Lock fittings for fast, glue-free installation. For outdoor irrigation use with cold water only.
- Compatible with controllers from Orbit, Hydro-Rain, and other major brands.
- Brass threads with valve bodies available in both PVC and brass body versions.
- Valve features 24 VAC solenoid, manual actuation lever, and flow control.
- Heavy-duty construction with UV resistance for durability and longevity.
- For converting a manual irrigation valve into an automatic irrigation valve.
- Control with a B-hyve smart controller for optimum water conservation.
- Includes a ring adapter.
- For outdoor use with cold water only.
- For irrigation applications only.
- Flow-control adjustment.
Every item checked for quality -
Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector
$34.64 $19.05With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.
- 6-outlet.
- 8 ft. 14-Gauge cord.
- 1500-jouels.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Home Decorators Collection 36 in. L x 8 in. W Profile Espresso Shelf
$70.00 $38.50The Espresso Profile Floating Shelf from Home Decorators Collection is a simple solution to maximizing wall space while creating an attractive wall design to display collectibles, bath accessories or various items. Featuring a rich espresso finish, this floating shelf will complement casual to elegant decor and is suitable for any room in your home. The detailed edge adds a stylish touch and the floating design allows for an eye-catching look that complements your items. Durably made with MDF construction, combine multiple sets to create a polished and pulled together look.
- Installation tip 1: for a sturdy installation, install at least 1 side of the wall shelf into a wall stud, as shown in the instructions.
- Installation tip 2: use the drywall anchor installation method to mount the shelf if you cannot locate a wall stud.
- Painted espresso finish complements any decor.
- Shelf shows no visible support and actually appears to be floating.
- Durable MDF (medium density fiberboard) construction meets new CARB standards.
Every item checked for quality -
RYOBI Rotary Tool Coarse Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)
$20.96 $11.53Introducing the Rotary Tool Coarse Flame Material Removal Burr. This burr is ideal for aggressive flowing, concave and v-shaped cuts and offers 11X more material removal than standard burrs. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.
- For Aggressive Flowing, Concave, and V-Shaped Cuts.
- For use on wood, plastic, fiberglass, and drwyall.
- 11X More Material Removed Than Standard Burr.
- 1/8 in. Shank.
- 35,000 Max RPM.
- USA Made.
Every item checked for quality -
Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee
$25.25 $13.89PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.
Every item checked for quality
