• Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $5.31 $2.92

  • EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)

    The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor 25 ft. detection range.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    • California Energy Commission Title 20 Compliant LED Light Bulb.
    Green checkmark of qualityEvery item checked for quality
    $21.09 $11.60

  • Halo HLBSL 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Kit

    Halo HLB4 Selectable Series Downlights are complete 4 in. ultra-thin canless recessed lights designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. Ultra-slim design goes where LED can lights can’t. Choose your color temperature directly on the fixture. With the flick of a switch, you can choose between 3 color temperatures ranging from warm (3000K) to daylight (5000K) prior to installing into your ceiling. This Halo recessed lighting fixture features an LED driver that offers 120-Volt dimming capability. The HLB4 LED recessed lighting soft lens provides uniform illumination and wet location listing.

    • Housing and J-box not required, easy to install spring clips firmly secure recessed LED lights in ceiling.
    • Repositionable driver junction box.
    • Selectable CCT allows customization to create perfect lighting for your home all throughout your house.
    • Choose between 3-discrete color temperature settings ranging from soft (3000K) to daylight (5000K).
    • LED recessed lights with attractive round Halo matte white finish and textured lens to provide smooth light distribution.
    • LED recessed lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs.
    • LEDs have 35,000-hours of life, eliminating your need to use and replace bulbs.
    • Good brightness at 675 Lumens (at 3000K color temperature) recessed lights provide illumination to any room.
    • 90 CRI, title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Air-tite, wet rated recessed lights can be used in shower and outdoor light applications.
    • Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
    • Halo 4 in. LED lights are IC rated, for direct contact with insulation.
    • 4 in. recessed lighting produces light equivalent to a 60-Watt bulb yet uses just 12-Watt (see product spec sheet to confirm).
    • 1/2 in. D makes this product great for use in shallow ceilings.
    • Fits into applications with as little as 3.5 in. plenum clearance.
    • ENERGY STAR qualified for energy conservation.
    Green checkmark of qualityEvery item checked for quality
    $13.87 $7.63

  • Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt

    The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.

    • Mower blade drive belt.
    • For MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
    • Kevlar cords are durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $45.49 $25.02

  • HDX 600 Lumens Integrated LED Clamplight

    This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.

    • High power SMD LED with 600 Lumens light output.
    • Ultra-thin panel for saving freight, store shelves and storage places.
    • With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
    • Ball joint for easy positioning.
    • SPT-2-8/2 in. 5 ft. cord.
    • Energy saving durable on/off power switch.
    • Full metal clamp with scratch-resistant vinyl sleeve.
    • Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
    • Heavy duty structure.
    Green checkmark of qualityEvery item checked for quality
    $19.98 $10.99

  • Naturezway Premium Quality Bamboo Disposable Paper Towels, 12-Piece Pack

    Naturezway Premium Quality Bamboo Disposable Paper Towels: 12 Mega Rolls, 120 Sheets Per Roll, 2-ply. Eco-Friendly, Hypoallergenic, lint-free, fragrance-free, and chlorine-free.

    Green checkmark of qualityEvery item checked for quality
    $18.18 $10.00

  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Home Decorators Collection Alberson 5 in. Brushed Nickel 2-Light LED Sconce

    Contemporary lines, ultra-sleek and high quality elegant finishes. This 2-light features frosted acrylic diffusers, vertically seated on a chrome frame. This LED wall sconce adds a clean, refined look to your space.

    • Frosted acrylic shades.
    • Brushed nickel finish.
    • Energy efficient LED.
    • Color temperature 3000K / Color Rendering Index(CRI) 90.
    • Approx. 50,000-hours of lighting.
    • Dimmable.
    • Can be installed vertically and horizontally.
    • Compatible Dimmer switches sold separately: Lutron -DVCL-153P / Lutron -MACL-153M / Lutron PD-6WCL / Lutron -CTCL-153PDH-WH / Lutron -TGCL-153PH-WH / Leviton -R62-06674-P0W / Eaton -AAL06-C1 / Leviton-R12-06672-1LW / Leviton-R50-IPL06-10M / Eaton-SAL06P-LA-K.
    Green checkmark of qualityEvery item checked for quality
    $99.96 $54.98

  • Toro TimeCutter SS 50 in. Deck Belt

    This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.

    • Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
    • Same as part # 119-8820.
    • Kevlar corded aramid fiber belt for superior durability.
    • Genuine Toro part.
    Green checkmark of qualityEvery item checked for quality
    $59.38 $32.66

  • Clopay Garage Door Rear Track Hanger Kit

    The Clopay Rear Track Hanger Kit allows for garage door track to be securely mounted to your garage ceiling. It comes as a kit with all the parts you need to assemble the rear track hanger. Works on most residential applications.

    • Can be used on garages with up to 2 ft. of headroom.
    • Galvanized construction for durable and long lasting performance.
    • Pre punched holes allow easy attachment to ceilings with various joist spacings.
    • Durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29

  • 2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub

    Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.

    • Sold as: Single unit.
    • Trade Size: 2 in.
    • Insulated throat.
    • Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
    • Assembled with 150° rated insulator.
    • Oversized locknut provides vibration-proof.
    • Wet or Dry Locations.
    • Primary Material: Zinc Die Cast.
    Green checkmark of qualityEvery item checked for quality
    $21.40 $11.77

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64

    BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering OT glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00