• 1-1/2 In. Male Threaded & Socket Terminal Adapter

    Adapter ideal for adapting PVC (polyvinyl chloride) conduit to boxes, threaded fittings, and metallic systems. Male threads on 1 end, socket end on other. UL (Underwriter’s Laboratories) listed.

    Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits

    Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

    Green checkmark of qualityEvery item checked for quality
    $1.89 $1.04

  • ClosetMaid SuperSlide 6.3 mm. Preloaded Back Wall Clips (48-Pack)

    The ClosetMaid Preloaded Back Wall Clips (48-Pack) help you anchor wire shelving to a drywall. Constructed from strong plastic, these clips install easily with the included push pins. Install easily with push pins (included).

    • For use as part of the ClosetMaid fixed mount system.
    • Should be spaced no further than 12 in. apart.
    • Made of strong plastic.
    • Install easily with push pins (included).
    Green checkmark of qualityEvery item checked for quality
    $14.47 $7.96

  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • EcoSmart 65-Watt Equivalent BR30 Dimmable Energy Star LED Light Bulb Soft White (6-Pack)

    The EcoSmart BR30 LED soft white is an indoor flood light bulb perfect BR30 shape to fit your indoor recessed cans or track light fixtures. The usual locations that this bulb is installed are kitchen, living room, dinner, office or bedroom. It is a perfect replacement of your traditional incandescent, CFL or Halogen lamps. It only uses 9-Watt and lasts for more than 20-years. The soft white light color creates a relaxing and comfortable environment and is particularly good in living, dinner or bedroom environment.

    • Brightness: 650-Lumens.
    • Estimated yearly energy cost: $1.08 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 22.8-years (based on 3-hours/day).
    • Light appearance: 2,700K (soft white).
    • Energy used: 9-Watt (equivalent to a 65-Watt standard incandescent light bulb).
    • Lumens per watt: 73.
    • Uses 86% less energy compared to a standard incandescent light bulb.
    • Ideal for use in recessed cans and track light fixtures.
    • Fully dimmable with a shadow-free experience, damp locations rated.
    • Contains mercury: no.
    • Not for use in totally enclosed fixtures.
    • Not for use in recessed luminaires.
    • Damp location rated.
    Green checkmark of qualityEvery item checked for quality
    $19.85 $10.92

  • SunTouch Floor Warming 8 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 20 sq. ft.)

    This 120 volt 8 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.

    • Energy efficient, inexpensive to operate.
    • Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
    • Single point power connection makes layout and wiring a snap.
    • Armored power lead, wire straight to the electrical box, no conduit required.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $239.00 $131.45

  • Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive

    Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.

    • Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
    • Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
    • Durable, seamless cover laminated over MDF.
    • Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
    • Easy glue down installation to coordinate stairs with your floor.
    • Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
    • Allows the customer to achieve a great new look that is affordable.
    • Cap A Tread fits over existing treads without having to modify them.
    • Simply cut to fit and glue over the existing stair tread.
    • For residential and light commercial use; interior use only.
    • Easy to clean with just a damp cloth.
    • Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
    • Proudly manufactured by Zamma Corporation.
    • Use only urethane based adhesive to install Cap-A-Tread.
    Green checkmark of qualityEvery item checked for quality
    $66.96 $36.83

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • 2 in. PVC Fitting – Meter Offset (Standard Fitting)

    The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.

    • Brings electrical service into a meter box.
    • Non-metallic PVC is heat, fire and corrosion resistant.
    • Compatible with sch. 40 or sch. 80 conduit.
    • Ridges on the outside for concrete encasement.
    • UL Listed for safety and peace of mind.
    • Socket on 1 end with threads on offset for easy installation.
    Green checkmark of qualityEvery item checked for quality
    $5.35 $2.94

  • Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)

    The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Most economical piping system available.
    • Meets UPC, IPC and cUPC standard.
    • Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
    • NSF listed.
    • Barb x MIP connection for PEX plumbing systems.
    • Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
    Green checkmark of qualityEvery item checked for quality
    $16.45 $9.05

  • 14.37D x 18.7W x 5.12H Above Counter Rectangular Bathroom Vanity Vessel Sink

    Flat and smooth surface. Easy for installation and staying clean. Modern, Glaze Glossy, Delicate, and solid ceramic with glaze. Durable & scratch-resistant lifetime use. High Temperature Integral Molding, Seamless, No Leakage. Above the counter installation. Length: 18.70″; Width: 14.37″; Height: 5.12″; Drain Size: 1-3/4″. Vessel sink only (Faucet and drain stopper not included).

    Green checkmark of qualityEvery item checked for quality
    $81.82 $45.00

  • EcoSmart 75-Watt Equivalent BR40 Dimmable ENERGY STAR LED Light Bulb Soft White (2-Pack)

    Upgrade your current lighting with the EcoSmart 75-Watt equivalent BR40 Dimmable Flood LED Light Bulbs. Use these bulbs to replace your traditional incandescent bulbs-with all the benefits of LED technology. Save on your energy bill every month. Rated to last for 15,000-hours and estimated to cost only $1.45 per-year to operate, these energy efficient BR40 LED light bulbs will reduce household energy costs by using 85% less energy than traditional incandescent bulbs. Using only 12-Watt to produce 945 Lumens of Soft White (2700K) light, these flood lights produce brightness equivalent to a 75-Watt incandescent light bulb. The soft white color temperature is essential in creating a relaxing, balanced feel throughout your home. It is recommended for living rooms, kitchens, bathrooms and bedrooms. Customize your lighting style with this dimmable bulb by adjusting your light from soft white to a relaxing, low light. Suitable for use in enclosed fixtures and ideal replacement bulbs for indoor recessed and track lighting. Start saving today with EcoSmart.

    • Brightness: 945 Lumens.
    • Estimated yearly energy cost: $1.45 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 13.7-year (based on 3-hours/day).
    • Light appearance: 2700K (soft white).
    • Energy used: 12-Watt (Equivalent to a 75-Watt standard incandescent bulb).
    • Energy used: 12-Watt (equivalent to a 75-Watt standard incandescent light bulb).
    • Fully dimmable with a shadow-free experience.
    • Ideal for use in totally enclosed fixture.
    • Damp locations rated.
    • LED light bulb does not contain mercury.
    • Energy efficient.
    Green checkmark of qualityEvery item checked for quality
    $10.47 $5.76

  • RYOBI Rotary Tool Smooth Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)

    Introducing the Rotary Tool Smooth Flame Material Removal Burr. For smooth flowing, concave and v-shaped cuts, this burr offers 4X more material removal than the standard burr. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.

    • For Smooth Flowing, Concave, and V-Shaped Cuts.
    • For use on wood, plastic, fiberglass, and drwyall.
    • 4X More Material Removed Than Standard Burr.
    • 1/8 in. Shank.
    • 35,000 Max RPM.
    • USA Made.
    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98