• Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker

    The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.

    • Red brass construction, nickel plated for protection from extreme weather.
    • Drains water from faucet upon shut off.
    • For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
    • Red brass with 80-83% copper content.
    • For outdoor use; not for potable water.
    • ASSE 1019 approved; IAMPO certified.
    Green checkmark of qualityEvery item checked for quality
    $24.98 $13.74

  • Residential Wired Main Remote Control for Tankless Gas Water Heaters

    UMC-117 main remote-control pad. Allows for easy temperature adjustment and maintenance information access. Connect up to 3 remote controls to your tankless system.

    • Digital display system remote.
    • Water resistant.
    • 140° maximum.
    • Precise temperature control 2° increments.
    • for Rheem branded Tankless Gas Mid or High Efficiency water heaters.
    Green checkmark of qualityEvery item checked for quality
    $62.07 $34.14

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Johnson Hardware 1060 Soft Close or Soft Open Hardware Kit

    The 1060 Soft Close or Soft Open Hardware Kit makes your sliding doors close or open softly and securely. Doors are smoothly braked and pulled into the opened or closed position. The 1060 Soft Close or Soft Open Hardware Kit can be used in the 1500 Series, 1560 Series and 1562 Series Pocket Door Frames, as well as the 100PD and 100SD Bypass Door Hardware and also with the 2610F Wall-Mount Sliding Door Hardware. The 1060 Soft Close or Soft Open Hardware Kit increases the weight capacity of the applicable pocket door hardware, bypass hardware and wall mounted hardware to 200 lbs. Two 1060 Soft Close or Soft Open Hardware Kits used together can create both a soft open as well as soft close.

    • Only one 1060 soft close or soft open hardware kit may be used in a 24 in. door application.
    • Two 1060 soft close or open hardware kits can be used in doors 28 in. or greater for a soft close and soft open solution.
    • 1060 soft close or soft open hardware kit can be used in a new install or retrofitted into LE Johnson pocket door frames, bypass door hardware, or wall-mount sliding door hardware.
    • Designed for doors up to 200 lbs.
    • 1060 soft close or soft open hardware kit is ADA compliant.
    Green checkmark of qualityEvery item checked for quality
    $54.45 $29.95

  • Halex 1 in. Electrical Metallic Tube Set-Screw Connectors (20-Pack)

    Choose Halex 1 in. EMT Set-Screw Connectors (10-Pack) to fix EMT conduit to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors indoors or in concrete-tight settings. This set-screw connector meets UL and CSA requirements.

    • Connects EMT conduit to a steel outlet box, load center or other metal enclosure.
    • Galvanized steel resists corrosion.
    • CSA and UL safety listings.
    • For indoor use or in concrete-tight applications when taped.
    Green checkmark of qualityEvery item checked for quality
    $25.60 $14.08

  • Powercare 16 in. Y54 Semi Chisel Chainsaw Chain

    The PowerCare Saw Chain features Centri-Lube oil-ways on all drive links. These oil-ways allow lubrication to flow up through the drive links and to the rivets. This reduces friction, chain stretch and results in fewer adjustments needed to the chain. This chain has hardened, chromed semi chisel cutters that allow it to stay sharper longer and cut faster in dirty cutting conditions, ideal for consumer use.

    • Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability.
    • This chain fits many McCulloch chain saw models.
    • Underwriter’s laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chai.
    • Centri-lube self-lubricating drive links that enhance chain life and reduce stretch.
    • Pitch: 3/8 in. LP semi-chisel; gauge: .050 in.; 54 drive links; file size: 5/32 in.
    Green checkmark of qualityEvery item checked for quality
    $17.82 $9.80

  • BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.

    • 1-piece unit combines valve and supply line.
    • Saves time with one less connection.
    • No special installation tools required.
    • Installation ready with pre-inserted tube stiffener.
    • Fast, reliable and secure.
    • Compatible with copper, PEX and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • 1.25 in. Center Stop PVC Coupling Conduit Fitting

    This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.

    • Connects conduit of the same diameter.
    • Non-corrosive PVC construction.
    • Joins metal conduit to PVC conduit or PVC to PVC.
    • UL and CSA safety listed for greater safety and peace of mind.
    Green checkmark of qualityEvery item checked for quality
    $1.51 $0.83

  • RUGPADUSA Essentials 6 ft. x 9 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad

    If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.

    • 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
    • Needle-punched felt.
    • Dense, thick felt provides cushion underfoot.
    • Will not strip, discolor, or damage any floor surfaces.
    • Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
    • Low VOC emissions keep your family safe from harmful irritants.
    Green checkmark of qualityEvery item checked for quality
    $49.42 $27.18

  • Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)

    The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.

    • For indoor use.
    • Made of zinc.
    • Compatible with EMT conduit.
    • Meets UL and cULus requirements.
    Green checkmark of qualityEvery item checked for quality
    $24.87 $13.68

  • Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee

    The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Individually bagged.
    • Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
    • Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
    • Cold-expansion tool (sold separately) is required for installation.
    • Meets or exceeds ASTM F1960 standard.
    • Meets UPC, IPC and cUPC standard.
    • Barb x Barb x Barb connection for PEX-A plumbing systems.
    • NSF listed.
    • Rated to 200 degree F and 200 psi.
    • Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
    Green checkmark of qualityEvery item checked for quality
    $14.27 $7.85

  • Apollo 1/2 in. and 3/4 in. PEX-B SS Sleeve Tool

    The ApolloPex Combo PEX Stainless Steel Sleeve Tool is a 2-in-1 tool designed to secure 1/2 in. and 3/4 in. stainless steel sleeves (not included) into place within PEX piping systems. There are no loose components, jaws to change, or adjustments to be made to create either size connection. Connections may be checked for security using the Go/No-Go Gauge (included). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with 1/2 in. and 3/4 in. stainless steel sleeves (not included).
    • Creates a secure dual crimp at each connection.
    • Contoured, comfort-grip handles accommodate gloved and bare hands.
    • Hardened steel construction ensures reliability and durability.
    • Factory calibrated to ensure proper connections right out of the box.
    • Smooth actuation mechanism allows secure connections with minimal force required.
    • Secures sleeves into place with dual crimping action.
    Green checkmark of qualityEvery item checked for quality
    $59.38 $32.66