-
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
$24.98 $13.74Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality -
SunTouch Floor Warming 72 in. x 30 in. 120-Volt Radiant Floor Heating Mat
$189.00 $103.95This 120 volt 6 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.
- Energy efficient, inexpensive to operate.
- Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
- Single point power connection makes layout and wiring a snap.
- Armored power lead, wire straight to the electrical box, no conduit required.
- Heat-up times are generally 30-45 minutes for framed floors, slabs take longer.
- High-quality heating cable made with oxygen-free copper heating element surrounded by ETFE insulation and a braided metal grounding jacket.
- Power lead is color-coded green (ground), black (power), and white (neutral).
- SunTouch is made in the USA and tested by the Tile Council of America.
- Mats can be connected in parallel for larger floor surfaces.
- Can be combined with a thermostat control (not included).
Every item checked for quality -
Eaton CH 15 Amp All in One AF/GF Plug-On-Neutral Breaker
$65.82 $36.20Eaton’s CH Circuit Breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. Eaton’s dual purpose arc fault/ground fault (AFCI/GFCI) circuit interrupter offers both types of protection in one familiar package, provides quick installation, and a single location to easily access and identify tripped circuits. The short-body AF/GF breaker can replace or fulfill all AFCI, GFCI or AF/GF requirements in an Eaton panel. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker. Quick, easy and clean describe the new plug-on neutral design attributes offered by Eaton. Time saving features offer a quick installation equating to less time on the job. Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation. New features that help ensure an aesthetically clean and professional installation.
- 1-pole, 15-amp, 120-volt.
- Plug-on neutral.
- CH type plug-on neutral dual function arc fault and ground fault breaker is compatible with CH type plug-on neutral breaker boxes.
- Interrupt rating-10-kAIC.
- Provides 1-device for both arc fault (AFCI) and ground fault (GFCI) protection for the entire circuit, allowing for a single point of reset.
- Offers complete protection from AFCI and GFCI for the entire circuit, including home-runs.
- Enables a lower installed cost versus other code-approved alternatives by using only one device to achieve both AFCI and GFCI protection.
- Integral LED indicates different trip causes including thermal overload indication, thus reducing troubleshooting time.
- Designed to maximize installation efficiency and to provide additional convenience allowing for an easy installation.
- Time savings up to 25% per AFCI and GFCI installation.
- Thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions.
- Includes a trip flag to differentiate between a trip and the breaker being turned off.
- Trip codes are stored permanently into the breaker’s memory, to help identify “trip” history.
- Reduced clutter of pigtails provides a clean gutter space and professional appearance.
- Handles are marked with on-off indication and ampere rating of the breaker.
- Meets areas requiring AFCI protection under the 200-and all subsequent edition of the NEC.
Every item checked for quality -
RUGPADUSA Essentials 9 ft. x 12 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$87.51 $48.13If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
StatGuardPlus Universal Thermostat Guard Clear with Changeable Code Combination Lock
$19.98 $10.99The StatGuardPlus thermostat cover protects your thermostat and prohibits unwanted tampering while still looking very stylish on your wall. It is fitted with a 3-digit combination lock and the combination code is changeable. It fits most thermostats and is made of high quality poly-carbonate clear plastic.
- Combination lock with changeable code.
- Fits over existing thermostat.
- Stylish high quality clear polycarbonate plastic.
- Hinged for easy access while open.
- Slotted on all sides for easy air flow.
- Fits thermostats up to 7 in. W x 4-7/8 in. H x 2-1/4 in. D.
- Comes with drywall anchors and screws.
Every item checked for quality -
Home Decorators Collection 14/18 in. L x 1.75 in. W Profile Floating Espresso Ledge (2-Piece)
$29.98 $16.49The Espresso Profile Floating Ledge from Home Decorators Collection is a simple solution to maximizing wall space while creating an attractive wall design to display collectibles or bath accessories. Featuring a rich espresso finish, this 2-piece set will complement casual to elegant decor and is suitable for any room in your home. The detailed edge adds a stylish touch and the floating design allows for an eye-catching look that complements your items. Durably made with MDF construction, combine multiple sets to create a polished and pulled together look.
- Installation tip 1: for a sturdy installation, install at least 1 side of the wall shelf into a wall stud, as shown in the instructions.
- Installation tip 2: use the drywall anchor installation method to mount the shelf if you cannot locate a wall stud.
- Set includes 2-shelves, one 14 in. W and one 18 in. W; both are 4 in. D and 2 in. W.
- Shelf shows no visible support and actually appears to be floating.
- Painted espresso finish will complement many decor styles.
- Easy to install and remove with a hidden metal bracket allowing greater weight capacity.
- Durable MDF (medium density fiberboard) construction meets CARB standards.
Every item checked for quality -
HGN Metal Faucet Glass Rinser for Kitchen Sink in Brushed Nickel
$36.36 $20.00- Original retail price: $55.29/$65.99.
- Brushed Nickel finish can be matched perfectly with your kitchen environment. Multi-angle water outlet cleaning head has multi-angle spraying holes that effectively wash your cup, saving time and effort – convenient and practical.
- From wine glasses to baby bottles to travel cups, it conveniently rinses virtually any drinkware, so you can spend less time soaking and scrubbing. Brushed Nickel finish resists water spots and fingerprints.
- Put the mouth of the cup downward and press the bottom of the cup lightly to automatically spray water for cleaning. When the cup is cleaned, remove the cup and stop spraying water.
- Simple DIY replacement for a soap dispenser, kitchen sprayer or sink hole cover – the perfect complement to your kitchen faucet. It only takes a few minutes to install our glass rinser all by yourself.
Every item checked for quality -
Orbit 1 in. FNPT Automatic Inline Angle Valve with Flow Control
$16.96 $9.33This Orbit 1 in. PVC FPT Automatic Inline Angle Valve with Flow Control features a slow closure speed that helps reduce water hammer and system wear. The valve operates at flow rates from 0.5 – 40 GPM.
- Use to replace or upgrade your existing sprinkler valves.
- Inlets on the bottom and the side allow easy installation.
- Operates at flow rates from 0.5 – 40 GPM.
- Operates between 15 – 125 psi.
- PVC construction is UV resistant.
- Stainless-steel spring.
- Flow control enables you to increase or decrease the flow of water through the valve to meet your watering needs.
- Wire rod design is self cleaning.
- Manual external bleed.
- Manual on/off lever.
- Slow closure speed helps reduce water hammer and system wear.
- Heavy-duty diaphragm for durability.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
RYOBI LVT/LVP Cutting Guide and Knife Kit
$20.47 $11.26Expand your RYOBI collection with the RYOBI LVT/LVP Cutting Guide and Knife Kit. This kit comes with an adjustable 18 in. Cutting Guide, Utility Knife, and three Blades, preparing you to easily score and snap your Luxury Vinyl Tile and Luxury Vinyl Plank. The Cutting Guide adjusts to various angles to provide clean and accurate cross cuts and miter cuts on LVT and LVP. The Utility Knife has an easy tool-free blade change and comes equip with on-board storage for 3 additional blades. Both have a lightweight design and hang holes to allow you to store and transport this kit wherever your project may be. This set is a consumable item and includes an adjustable 18 in. Cutting Guide, Utility Knife, and three Blades.
Every item checked for quality
