• Potrisers Invisible Pot Feet for Containers & Statuary

    POTRISERS, made from 100-percent recycled material, were designed to be an eco-friendly, indestructible and low profile alternative to decorative pot feet, trays and trivets. While remaining hidden, POTRISERS can be fitted to heavy, pre-planted containers. Rubberized material grips surfaces while providing cushioning on hard or uneven surfaces such as wood, concrete, aggregate, compacted materials or stone. POTRISERS come in both retail and bulk packaging. Designed to protect and hide drip lines, POTRISERS allow for easy cleaning and provide crucial drainage needed for healthy plants. By floating containers off the ground, pots are less likely to freeze and crack in cold temperatures. Stack them to level planters on slopes. Suggested Use: Equally space 4 risers beneath outside edges of pot. If using with a tray – place a set below the tray to prevent water rings or condensation on surfaces, and within the tray beneath the pot to allow the pot to drain freely. POTRISERS have been field tested by the Engineering Laboratory of the University of Washington for strength and field tested for durability. This standard riser, recommended for small to medium pots and statuary, will support up to 1600-pound (per set of 4).

    Green checkmark of qualityEvery item checked for quality
    $3.98 $2.19
  • Cadet Double-pole 15 Amp Line Voltage 120/240-volt TEP Series 5-2 Day Electronic Programmable Thermostat in White

    Save on your home heating bill with the precise technology of this programmable electronic thermostat. Features include touchscreen controls, a large and easy-to-read backlit display, four daily setting options, and more. This line voltage thermostat is compatible with fan-forced in-wall electric heaters, electric baseboard heaters, and with linear and panel convector heaters as well.

    • Lower your heating costs with precise temperature control within one degree and simple electronic controls to manage usage.
    • Line voltage thermostat compatible with in-wall and baseboard electric heaters (120/208/240-Volt).
    • Simple 4-wire installation (double-pole) and includes an off setting.
    • 5-2 day programming, with 4 daily events and 4 quick modes, including early start, vacation, comfort and economy.
    • Tamperproof your program settings with a security lock.
    • Choose temperature display in Celsius or Fahrenheit.
    • 15 Amp.
    • UL listed in the US and Canada for safety compliance.
    Green checkmark of qualityEvery item checked for quality
    $68.91 $37.90
  • RUGPADUSA Essentials 9 ft. x 12 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad

    If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.

    • 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
    • Needle-punched felt.
    • Dense, thick felt provides cushion underfoot.
    • Will not strip, discolor, or damage any floor surfaces.
    • Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
    • Low VOC emissions keep your family safe from harmful irritants.
    Green checkmark of qualityEvery item checked for quality
    $87.51 $48.13
  • Commercial Electric Ultra Slim 4 in. Color Selectable New Construction & Remodel IC Rated Indoor/Outdoor Integrated LED Recessed Light Kit

    The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 4 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits and all general lighting applications.

    • SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
    • EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 4.25-inches. Trim size: 5-inches.
    • LIGHT SPECS: 60W equivalent Integrated LED using only 9W – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – bright 540 lumens – 50,000-hour, 34 year, lifespan – Energy Star Certified.
    • WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
    • IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
    • DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
    • ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
    Green checkmark of qualityEvery item checked for quality
    $22.47 $12.36
  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector

    With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.

    • 6-outlet.
    • 8 ft. 14-Gauge cord.
    • 1500-jouels.
    Green checkmark of qualityEvery item checked for quality
    $34.64 $19.05
  • Kawasaki Original Equipment Kawasaki Air Filter for Kawasaki FR and FS Series Engines, OE# 11013-0752, 11013-7049, 1103-7047

    Kawasaki air filters have been tested in punishing conditions to ensure consistent performance year-round. The precision fit maintains original engine efficiency and performance. The filters provide higher dirt capture capability resulting in less engine maintenance over time.

    • For Kawasaki Engines.
    • Fits DEWALT Zero-Turn Mower models X548 and X554.
    • Original equipment part for air filters 11013-7052, 11013-7049, 1103-7047, 99999-0384, KM-11013-7049, KM-11013-7052 and KM-11013-7047.
    • Contents include one air filter.
    • Factory tested and approved to provide the perfect fit, strength, durability and performance.
    • Kawasaki Air Filters provide superior filtration with low-flow restriction. They are built for long life and help to protect your engine.
    • Filters are designed by engineers using high-quality materials for superior dust-holding capacity.
    • Filters trap and hold damaging particles effectively ensuring less engine maintenance over time.
    • For detailed installation instructions, please refer to your instruction manual.
    Green checkmark of qualityEvery item checked for quality
    $21.98 $12.09
  • Halex 1 in. Electrical Metallic Tube Set-Screw Connectors (20-Pack)

    Choose Halex 1 in. EMT Set-Screw Connectors (10-Pack) to fix EMT conduit to steel outlet boxes, load centers or other metal enclosures. Install these galvanized connectors indoors or in concrete-tight settings. This set-screw connector meets UL and CSA requirements.

    • Connects EMT conduit to a steel outlet box, load center or other metal enclosure.
    • Galvanized steel resists corrosion.
    • CSA and UL safety listings.
    • For indoor use or in concrete-tight applications when taped.
    Green checkmark of qualityEvery item checked for quality
    $25.60 $14.08
  • Black Pop up Sink Drain Stopper with Overflow, Bathroom Faucet Lavatory Vessel Pop Up


    Press the top of the pop-up to close, and another press to open. Durable solid brass construction ensured quality and longevity. Please make sure the gaskets are in the right position to avoid leakage. Black finish build to resist daily scratches and corrosions. Fits hole diameter 1.57 inch to 1.92 inch & sink thickness 0.98 inch to 1.88 inch.

    Green checkmark of qualityEvery item checked for quality
    $18.18 $10.00
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Commercial Electric 1-1/2 in. x 108 ft. Heavy Duty Tape, Black

    Heavy duty, pressure sensitive vinyl tape of 10mil thickness. It’s used for all types of mechanical and electrical applications. It’s flame retardant and can be used as primary insulation for splices at not more than 600-Volt.

    • Quicker buildups and added abrasion protection.
    • Flame retardant.
    • Resistant to sun, water, oil, acids, alkalis, corrosive chemicals.
    • Lead free.
    Green checkmark of qualityEvery item checked for quality
    $18.98 $10.44
  • 75-Watt Equivalent BR40 Dimmable LED Light Bulb Daylight (12-Pack)

    The BR40 LED-daylight is an indoor flood light bulb with a perfect BR40 shape to fit your indoor recessed cans or track light fixtures. Use this bulb in locations such as kitchens, living rooms or home offices. It is a perfect replacement of your traditional incandescent, CFL or halogen lamps. It only uses 10.5-Watt and can last up to 10-years based on a 3-hour a-day usage schedule. The bright white light color creates a relaxing and comfortable hue and is particularly good for a lively dinner environment.

    • Brightness: 985 Lumens.
    • Estimated-yearly energy cost: $ 1.26 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 10-year (based on 3-hours/day).
    • Light appearance: 5,000K (daylight).
    • Energy used: 12-Watt (equivalent to a 75-Watt standard).
    • Ideal for use in recessed cans and track light fixtures.
    Green checkmark of qualityEvery item checked for quality
    $39.98 $21.99