• Home Decorators Collection Alberson 5 in. Brushed Nickel 2-Light LED Sconce

    Contemporary lines, ultra-sleek and high quality elegant finishes. This 2-light features frosted acrylic diffusers, vertically seated on a chrome frame. This LED wall sconce adds a clean, refined look to your space.

    • Frosted acrylic shades.
    • Brushed nickel finish.
    • Energy efficient LED.
    • Color temperature 3000K / Color Rendering Index(CRI) 90.
    • Approx. 50,000-hours of lighting.
    • Dimmable.
    • Can be installed vertically and horizontally.
    • Compatible Dimmer switches sold separately: Lutron -DVCL-153P / Lutron -MACL-153M / Lutron PD-6WCL / Lutron -CTCL-153PDH-WH / Lutron -TGCL-153PH-WH / Leviton -R62-06674-P0W / Eaton -AAL06-C1 / Leviton-R12-06672-1LW / Leviton-R50-IPL06-10M / Eaton-SAL06P-LA-K.
    Green checkmark of qualityEvery item checked for quality
    $99.96 $54.98

  • SunTouch Floor Warming 72 in. x 30 in. 120-Volt Radiant Floor Heating Mat

    This 120 volt 6 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.

    • Energy efficient, inexpensive to operate.
    • Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
    • Single point power connection makes layout and wiring a snap.
    • Armored power lead, wire straight to the electrical box, no conduit required.
    • Heat-up times are generally 30-45 minutes for framed floors, slabs take longer.
    • High-quality heating cable made with oxygen-free copper heating element surrounded by ETFE insulation and a braided metal grounding jacket.
    • Power lead is color-coded green (ground), black (power), and white (neutral).
    • SunTouch is made in the USA and tested by the Tile Council of America.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $189.00 $103.95

  • Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)

    The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
    • Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
    • Pro pack includes 25 sleeves.
    • Requires expansion tool (sold separately) for use.
    • For use exclusively with PEX-A (ASTM F1960) pipe and systems.
    • Meets or exceeds ASTM F1960 and ASTM F877 standards.
    • Meets UPC, IPC and cUPC standard.
    • Rated to 200F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $16.38 $9.01

  • #1, STRM006CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • FitRite 21 in. x 16.5 in. Backflow Valve Cover

    The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 16.5 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.

    • Backflow valve cover.
    • Irrigation system accessory.
    • 21 in. length, 2-1/4 in. width, 16.5 in. height.
    • Black color.
    • Easy installation, installs in seconds.
    • Extends your watering season.
    • Fits most backflow assemblies.
    • Durable weatherproof material, UV and cold resistant.
    • Allows backflow devices to function properly.
    • Made for virtually all brands of PVB’s and RP’s.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee

    The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).

    • Intended for point of use/under sink installations to provide safe outlet water temperature.
    • Ideal for individual faucets and electronic faucets.
    • ASSE 1070 approved.
    • Listed by ASSE, CSA, IAPMO.
    • Accurate temperature control with flows as low as 0.25 gpm.
    • Robust, low complexity design and total flow shut-off if cold supply fails.
    Green checkmark of qualityEvery item checked for quality
    $78.40 $43.12

  • HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter

    The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.

    • Very high quality brass construction.
    • 1/2 in. diameter.
    • For use with HOME-FLEX CSST systems.
    • For use with natural gas or liquid propane.
    • CSA and IAPMO certified.
    • Not for use with Home Flex UNDERGROUND poly tubing.
    • HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
    • Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
    • CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
    Green checkmark of qualityEvery item checked for quality
    $10.13 $5.57

  • 2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings

    Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.

    • For use in Square D load centers, CSED devices and safety switches.
    • Can be used for outdoor load centers and safety switches.
    • UL and CSA listed.
    • Type B size.
    • ANSI certified.
    Green checkmark of qualityEvery item checked for quality
    $20.47 $11.26

  • NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub

    Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.

    Green checkmark of qualityEvery item checked for quality
    $9.51 $5.23

  • StatGuardPlus Universal Thermostat Guard Clear with Changeable Code Combination Lock

    The StatGuardPlus thermostat cover protects your thermostat and prohibits unwanted tampering while still looking very stylish on your wall. It is fitted with a 3-digit combination lock and the combination code is changeable. It fits most thermostats and is made of high quality poly-carbonate clear plastic.

    • Combination lock with changeable code.
    • Fits over existing thermostat.
    • Stylish high quality clear polycarbonate plastic.
    • Hinged for easy access while open.
    • Slotted on all sides for easy air flow.
    • Fits thermostats up to 7 in. W x 4-7/8 in. H x 2-1/4 in. D.
    • Comes with drywall anchors and screws.
    Green checkmark of qualityEvery item checked for quality
    $19.98 $10.99

  • Powercare Y50 14 in. Semi Chisel Chainsaw Chain

    The PowerCare Saw Chain features Centri-Lube oil-ways on all drive links. These oil-ways allow lubrication to flow up through the drive links and to the rivets. This reduces friction, chain stretch and results in fewer adjustments needed to the chain. This chain has hardened, chromed semi chisel cutters that allow it to stay sharper longer and cut faster in dirty cutting conditions, ideal for consumer use.

    • Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability.
    • Chain fits many Homelite, McCulloch, Remington and Stihl chain saw models.
    • Underwriters laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chai.
    • Centri-lube self lubricating drive links that enhance chain life and reduce stretch.
    • Pitch: 3/8 in. LP semi-chisel, gauge: 0.050 in., 50 drive links, file size: 5/32 in.
    • Meets UL requirements for ANSI low kickback safety saw chains.
    Green checkmark of qualityEvery item checked for quality
    $16.76 $9.22

  • SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit

    The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

    • Lead free DZR brass construction for durability and reliability.
    • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
    • Innovative push-to-connect design makes for quick and easy installation.
    • Push-to-connect fittings require no solder, glue, unions, or tools.
    • Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
    • Designed for potable water distribution as well as hydronic heating applications.
    • Corrosion resistant to improve longevity.
    • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
    • Rated to 200°F and 200 psi.
    • Rated to 200°F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00