• Commercial Electric 1-1/2 in. x 108 ft. Heavy Duty Tape, Black

    Heavy duty, pressure sensitive vinyl tape of 10mil thickness. It’s used for all types of mechanical and electrical applications. It’s flame retardant and can be used as primary insulation for splices at not more than 600-Volt.

    • Quicker buildups and added abrasion protection.
    • Flame retardant.
    • Resistant to sun, water, oil, acids, alkalis, corrosive chemicals.
    • Lead free.
    Green checkmark of qualityEvery item checked for quality
    $18.98 $10.44
  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75
  • WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box

    WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.
    • Model #RSC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
    • ANSI-61 gray polyester powder inside and out.
    • Drip shield top and smooth seamless sides and front.
    • Mounting holes provided on back of enclosure.
    • Hasp for padlocking or meter seal is provided.
    Green checkmark of qualityEvery item checked for quality
    $44.27 $24.35
  • Defiant 15 Amp In-Wall 3-Way Daylight Adjusting Digital Timer Switch with Screw Terminals, White

    Your switch does the work for you with the Defiant 7-Day In-Wall Digital Timer. By supporting up to seven ON/OFF schedules, the timer is ideal for varied routines. A seven-day cycle allows different schedules based on the day of the week. It provides simple, convenient automation for your hardwired lighting in single-pole or three-way installations. For increased versatility, the timer works with LED, CFL, incandescent and halogen bulbs, which is perfect for porch lighting, ceiling lights, seasonal decor and more. In addition to custom ON/OFF programs, dusk and dawn settings enhance scheduling options. The random feature fluctuates programmed times by up to 30 minutes to create a lived-in appearance. A countdown function automatically turns off lights after a desired period. Built-in self-adjusting technology automatically recognizes the sunrise and sunset times for your region and makes the appropriate adjustment to your lighting settings. The timer features a replaceable door to conceal the buttons and includes white and light almond doors to match your existing rocker-style switches – wallplate not included. It also serves as an ON/OFF switch when closed. Home automation is even more automatic with the Defiant 7-Day In-Wall Digital Timer.

    • Self-adjusting technology – Built-in technology automatically adjust lighting times based on sunrise and sunset in your region and accounts for daylight saving time changes.
    • Weekly programming – 7-day cycle provides consistent control with the ability to vary schedules based on the day of the week.
    • Switch upgrade – Replaces single-pole or three-way switches to control LED, CFL, incandescent and halogen bulbs, and other fixtures – neutral wire required.
    • Replaceable door – Convenient door in white and light almond conceals programming buttons and functions as ON/OFF switch.
    • Digital display – Large LCD screen offers easy viewing of settings and time.
    Green checkmark of qualityEvery item checked for quality
    $27.98 $15.39
  • Intermatic T100 Series 40 Amp 208-277V DPST 24 Hour Mechanical Time Switch Mechanism

    The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.

    • Direct 24-hour control of most loads.
    • Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour.
    • Manual override.
    • One ON and one OFF tripper included.
    • Mechanism only.
    • Perfect for use with indoor/outdoor lighting, signs, filters, electric fences, fans, conveyors, pool heaters, blowers, pumps and more.
    Green checkmark of qualityEvery item checked for quality
    $79.98 $43.99
  • Everbilt 30/50 Low Pressure Switch For Well Pumps

    This pressure switch signals the pump to start when the water system drops to 30 PSI (factory set) and stops at 50 PSI (factory set). This switch is to be used with submersible well or jet pumps. It can be wired 115-Volt or 230-Volt. This switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 28 PSI, or the switch will not operate properly. This switch is equipped with a low-level cut-off arm that automatically shuts off a well pump when there is a dramatic decrease in pressure, such as a leak in the discharge pipes or a faulty pressure tank.

    • Turns pump on at 30 psi, off at 50 psi.
    • Cap removes for easy adjustment.
    • Can be wired 115-Volt or 230-Volt.
    • For use with submersible well or jet pumps.
    • Motor wires are connected to the 2 middle posts (color does not matter).
    • Breaker box wires are connected to 2 outside posts (color does not matter).
    • 2-spring design allows for adjustment of cut-in and cut-out pressure settings.
    • Adjustments to springs should only be made by users with good knowledge of well systems.
    • Switch shuts off pump automatically when there is a dramatic decrease in pressure.
    Green checkmark of qualityEvery item checked for quality
    $30.82 $16.95
  • SharkBite Push-to-Connect Faucet Installation Kit

    The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00
  • Clopay Opener Reinforcement Bracket Kit

    21 operator bracket- fits all makes and model garage doors. Used on top section to re-in-force/support section from operator installation. Prevents direct attachment to door.

    Green checkmark of qualityEvery item checked for quality
    $66.33 $36.48
  • Orbit 3/4 in. Automatic Converter Valve

    The automatic converter valve allows you to transform an existing manual valve into a fully automatic valve. The converter valve fits the threads in most makes of manual valves, including manual anti-siphon valves. Brass threads ensure reliable installation and high durability. The valve features a 24 VAC solenoid, manual actuation lever, bleed screw, and flow control. In cases where there is no existing sprinkler wire running to the valve, the Orbit battery-powered controller provides a simple way to power up to four valves in a single location. The automatic converter valve is compatible with all major brands of 24 VAC irrigation controllers. We recommend B-hyve controllers for optimum water conservation and PVC-Lock fittings for fast, glue-free installation. For outdoor irrigation use with cold water only.

    • Compatible with controllers from Orbit, Hydro-Rain, and other major brands.
    • Brass threads with valve bodies available in both PVC and brass body versions.
    • Valve features 24 VAC solenoid, manual actuation lever, and flow control.
    • Heavy-duty construction with UV resistance for durability and longevity.
    • For converting a manual irrigation valve into an automatic irrigation valve.
    • Control with a B-hyve smart controller for optimum water conservation.
    • Includes a ring adapter.
    • For outdoor use with cold water only.
    • For irrigation applications only.
    • Flow-control adjustment.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73
  • RUGPADUSA Essentials 6 ft. x 9 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad

    If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.

    • 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
    • Needle-punched felt.
    • Dense, thick felt provides cushion underfoot.
    • Will not strip, discolor, or damage any floor surfaces.
    • Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
    • Low VOC emissions keep your family safe from harmful irritants.
    Green checkmark of qualityEvery item checked for quality
    $49.42 $27.18
  • Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery

    The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.

    • 180 Lumens.
    • White sign with red lettering.
    • Thermoplastic housing.
    • Meets UL 924 requirements.
    • Uses two 1-Watt LED light strips (included).
    • Nickel-cadmium backup battery.
    Green checkmark of qualityEvery item checked for quality
    $79.96 $43.98
  • Clopay Garage Door Keyed Lock Set

    Provide additional security for your garage door with the Clopay Garage Door Keyed Lock Set. This lock set can be used for garage doors up to 18 ft. wide. It includes everything needed to replace the garage door lock system.

    • Lock can be operated from inside or outside the garage.
    • Includes 2 pre cut keys.
    • Easily installs with a drill and screwdriver.
    • Not recommended for use on doors with a garage door opener.
    Green checkmark of qualityEvery item checked for quality
    $32.98 $18.14