-
Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker
$24.98 $13.74The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.
- Red brass construction, nickel plated for protection from extreme weather.
- Drains water from faucet upon shut off.
- For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
- Red brass with 80-83% copper content.
- For outdoor use; not for potable water.
- ASSE 1019 approved; IAMPO certified.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray
$77.11 $42.41With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
- 2-sets of on/off trippers.
- Enables shifting electricity use into off-peak hours to reduce energy costs.
- Convenient external override switch.
- Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
- Metal indoor enclosure.
Every item checked for quality -
Hampton Bay Wireless Battery Operated Doorbell Kit with Wireless Push Button, Nickel with Gray Fabric
$39.98 $21.99The new Wireless Battery Operated Doorbell Kit includes push button and is a perfect addition to your home decor. Battery operated and easy installation will make replacing or upgrading your current doorbell so simple. Pick any of the 6 selectable tunes of your choosing. This new contemporary design will perfectly compliment any home decor.
- Syncs with all Defiant branded and Heath Zenith branded push button.
- Wireless push button included.
- Requires 3 C batteries (batteries not included).
- 200 ft. range and 85 dB maximum loudness.
Every item checked for quality -
Everbilt 24 in. Hanging Shelf
$18.98 $10.44The Everbilt 24 in Large Hanging Wire Shelf instantly adds additional storage space to any wire shelf. Just hook to any wire shelf for easy installation without tools or hardware. Constructed of durable steel wire, the simple white coated finish creates a smooth surface that coordinates with your closet design.
- Can be used with most types of wire shelving.
- Instantly adds additional storage to any shelf.
- Durable metal wire body with a simple white finish.
- No assembly, tools or hardware required for installation.
- Purchase additional shelves to create a vertical storage solution (link up to 3 max).
- Instantly adds space for folded garments in any closet.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
Squared, 4-inch Single Handle Bathroom Faucet in Chrome
$90.91 $50.00- Model: A-DIL001 – Dillion Basin Mixer.
- Function: Single Lever Bathroom Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Dimensions: 175 mm H x 156 mm D (6.889 in. H x 6.141 in. D)
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
Every item checked for quality -
ECHO YOUCAN Fuel System Kit 225 Series Models
$14.98 $8.24Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.
- Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
- For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
- Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
- Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
- Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
Every item checked for quality -
#9, STRM005BN, Pull Down Kitchen Faucet in Brushed Nickel
$100.00 $55.00- Model: Star Mini Pull-Out Kitchen Mixer – STRM005BN.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Brushed Nickel.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
Hampton Bay 14.37 in. White Dusk to Dawn Decorative Outdoor Wall Lantern Sconce Light
$64.96 $35.73The classic look of the Hampton Bay White Wall-Mount Outdoor Dusk-to-Dawn Lantern adds style to your outdoor space. The dusk-to-dawn photocell will activate the light bulb at dusk and turns it off for you at dawn, so you don’t have to worry about accidentally leaving your light on during the day. The clear beveled glass diffuser provides a clean, sharp appearance. Uses one 60-Watt maximum light bulb (not included).
- White finish with rugged cast aluminum housing that is ideal for outdoor installation.
- Clear beveled glass panes create a sharp, clear look when illuminated.
- Photocell turns the fixture on at dusk and turns it off at dawn.
- Uses 1 60-Watt maximum bulb (not included).
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Commercial Electric Ultra Slim 4 in. Color Selectable New Construction & Remodel IC Rated Indoor/Outdoor Integrated LED Recessed Light Kit
$22.47 $12.36The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 4 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits and all general lighting applications.
- SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
- EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 4.25-inches. Trim size: 5-inches.
- LIGHT SPECS: 60W equivalent Integrated LED using only 9W – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – bright 540 lumens – 50,000-hour, 34 year, lifespan – Energy Star Certified.
- WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
- IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
- DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
- ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
Every item checked for quality
