• BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • #1, STRM006CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00
  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter

    The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel male pipe thread (MPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62
  • Rino-Tuff Universal Fit Pivotrim Hybrid 2-N-1 Replacement Head Gas and Select Cordless String Grass Trimmer/Lawn Edger

    The Pivotrim Hybrid Replacement Trimmer Head by Rino-Tuff is a durable 2-in-1 trimmer head with pivoting lines to cut grass or nylon blades to cut light brush. The head is made from carefully crafted glass-filled nylon for superior durability and abrasion resistance, it can withstand the extreme demand of any job. With its Pivoting line technology, the line bounces back when trimming against obstacles, instead of bending and breaking. So, trimming against hard surfaces such as chain-link fence, trees and concrete are no longer a problem. With strips that are already cut to size, you can load and reload line in seconds. All you have to do is feed the strips through the pivoting posts. The powerful serrated nylon edges on the blades allow you to cut through thick weeds with ease. With its Push-N-Load technology, blades can be loaded and reloaded in seconds. That means cutting more with less downtime to get the job done faster, leaving you more time to do the things you want.

    Green checkmark of qualityEvery item checked for quality
    $29.96 $16.48
  • Zenna Home NeverRust Aluminum Double Roller Shower Hooks in Bronze (12-Pack)

    These Zenna Home Aluminum Double Roller Shower Hooks provide a rustproof way to allow both a shower curtain and a shower liner to be easily added, replaced or removed from any shower rod. These rustproof hooks have an innovative roller mechanism that allows them to glide easily over any shower rod. The hooks come in a package of 12 to match the number of holes on standard shower curtains and liners. The rich bronze finish will complement many bath decor and hardware styles.

    Green checkmark of qualityEvery item checked for quality
    $18.18 $10.00
  • Everbilt Genevieve 2 Ft. White Adjustable Closet Organizer Decor Shelf Cover (2PK)

    The Everbilt Decorative Shelf Cover is designed to snap-on to any 24in adjustable ventilated wire shelf. Includes (2) 2ft white decorative shelf covers. Easy snap-on assembly.

    Green checkmark of qualityEvery item checked for quality
    $42.00 $23.10
  • SunTouch Floor Warming 4 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 10 sq. ft.)

    The SunTouch Floor Heating Mat measures 4 ft. x 30 in. and offers an ultra-thin, low-profile system that installs beneath tile, stone and even vinyl or laminate flooring. Its ideal for remodeling bathrooms and kitchens to add radiant floor heating and offers an upscale option when designing new construction floor warming. Dual-wire technology reduces electromagnetic fields (EMF) to ultra-low levels. The mat is an energy-efficient touch of radiant floor warming luxury for your home, is UL listed, and comes with detailed installation instructions.

    • Install the heated floor mat below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood- and laminate floors.
    • For indoor floor-warming use only.
    • Open-weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floor.
    • Dual wire technology keeps EMF to ultra-low levels.
    • UL listed for safety.
    • Energy efficient, inexpensive to operate.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a programmable thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $169.51 $93.23
  • Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)

    Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.

    • Model # 2G4D1234-10R.
    • Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
    • Zinc-galvanized steel is rust- and corrosion resistant.
    • Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
    • UL Listed.
    • 17 knockouts for use with 1/2 in. and 3/4 in. connections.
    Green checkmark of qualityEvery item checked for quality
    $65.29 $35.91
  • HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant

    Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.

    • Title 20 compliant, can be shipped to California locations.
    • ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
    • Includes black and white baffle attachments, extra regression for better glare control.
    • Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
    • White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
    • Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
    • 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Wet rated, can be used in shower and outdoor light applications.
    • Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
    • Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
    • E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
    • Mountable using friction blades (included).
    • Rated for use with IC and non-IC rated housings.
    • 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11
  • Truth Encore Operators Handle And Cover – Left Hand

    Designed as an integrated system, Encore operators and locks provide unmatched elegance and performance. With a time-proven design, Encore products stand out in beauty while enhancing the window’s overall appearance. Differentiate your window line by taking advantage of Encore’s unique cover and handle designs. Encore’s full-flip folding handle recesses in the operator cover–giving windows a smooth, contemporary look–and eliminating interference with curtains and blinds. The snap-fit cover removes easily for painting and staining of window frame.

    • Color/Finish: Clay.
    • Cover Material: Plastic.
    • Handle Material: Die Cast Metal.
    • Configuration: Left Hand.
    Green checkmark of qualityEvery item checked for quality
    $20.31 $11.17
  • Home Decorators Collection 8 in. L x 1.75 in. H White Floating Ledge (2-Pack)

    The White Floating Ledge from Home Decorators Collection is designed to help you display small collectibles in areas where there is limited wall space. The hidden mounting hardware and simple edge detail provide a clean appearance, while the white finish adds a fresh look to any decor style. Easy to install with hardware included, this 2-piece set is a simple solution to adding depth and visual interest to your walls and interior spaces.

    • Create any arrangement from 1-shelf to a complete shelving system.
    • Sculpted edge detail.
    • Perfect for displaying candles, photo frames and other small decor.
    • Hardware included.
    • Shelves can be adjusted to any height.
    Green checkmark of qualityEvery item checked for quality
    $16.00 $8.80
  • BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.

    • 1-piece unit combines valve and supply line.
    • Saves time with one less connection.
    • No special installation tools required.
    • Installation ready with pre-inserted tube stiffener.
    • Fast, reliable and secure.
    • Compatible with copper, PEX and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00