-
Hampton Bay 1-Light White R20/par20 Medium-Step Linear Track Lighting Head
$23.58 $12.97This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton…
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Bright White (2-Pack)
$21.09 $11.60The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality -
Pfister S60-151A 2-3/4 in. Zinc Die-Cast Crown Imperial Shower Flange with Sleeve in Chrome
$35.42 $19.48Flanges provides a decorative way to cover the stems of a faucet. S60-151A Crown Imperial Shower Flange is for use with new style Pfister shower valves. 2-piece design for easier installation.
- 2-3/4 in. O.D.
- Chrome finish.
- Includes set screw.
- Tube and flange design.
- Genuine Pfister replacement part.
- Internal threads to mount to stem.
Every item checked for quality -
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality -
Everbilt 0.1 HP Non-Submersible Transfer Pump
$109.09 $60.00The Everbilt portable transfer pump delivers 360 GPH at 0 ft. of lift using a 3/4 in. garden hose threaded connection. The angled inlet and outlet design keeps water lubricating the impeller and significantly increases impeller life. The clear see-through suction hose allows for easy monitoring of the pump performance to avoid running dry for an extended period of time. The brass pump body insert with reinforced high strength plastic pump housing, stainless steel motor shaft and pump cover provided corrosion free resistance. The pump is self-priming up to 9 ft. The kit includes a 6 ft. suction hose, suction strainer, and replacement impellers and brushes. 115-Volt operation.
- Patented run-dry protector increases impeller life and prevents pump body from overheating.
- Clear see-through suction hose allows for easy monitoring of water movement.
- Suction strainer filters and removes water down to 1/8 in.
- Angled design keeps water lubricating the impeller.
Every item checked for quality -
Ruby Sliders Furniture and Chair Leg Sliders (8-Pack)
$4.55 $2.50Furniture legs can scar your floors and cost you a lot of cash, but with Ruby Sliders, the new chair leg cover that protects your floors, prevents scratching and slide with ease without all the noise. They fit snuggly on most sized legs and glide across any floor. Regular felt gets worn and easily falls out, but Ruby Sliders feature an ultra tight, nano-weave material that is meant to last.
- Original retail price: $9.98.
- Stretch to fit most furniture legs.
- Chairs slide without the noise.
- No more scratched floors.
- Premium nano-weave felt won’t fall off.
- Value pack 8-pieces.
Every item checked for quality -
TrafficMaster Dark Grey Slate 3 MIL x 12 in. W x 12 in. L Peel and Stick Water Resistant Vinyl Tile Flooring (30 sqft/case)
$59.71 $32.84The gray tones of this slate vinyl tile are a great fit with many decor styles. With natural beauty, your room will be enhanced and maintenance is a breeze. Installs with the peel-and-stick method.
- Dark grey slate low gloss finish.
- 2.03 mm thickness x 12 in. width x 12 in. length.
- Appropriate grade for installation: all grades.
- Install over almost all sound and smooth subfloors including wood, vinyl and concrete with easy peel and stick method.
- Residential use.
- Sweep or vacuum your floors regularly (do not use beater bar on your vacuum); wash your floor occasionally with Lifeproof Hard Surface Floor Cleaner.
Every item checked for quality -
Halex #2 ACC Conduit Hanger (25-Pack)
$16.98 $9.34The #2 Conduit and Pipe Hangers are designed to secure and suspend 1 in. Rigid or EMT conduits to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.
- Secure and suspend 1 in. rigid and EMT conduits from overhead supports.
- Zinc-plated steel resists corrosion.
- Compatible with 1 in. conduit.
- UL and CSA safety listings.
- For indoor or outdoor applications.
- Bolt has a square neck for easy assembly.
Every item checked for quality -
Commercial Electric Ultra Slim 6 in. Adjustable CCT Canless New Construction & Remodel IC Rated Indoor/Outdoor LED Recessed Light Kit
$24.96 $13.73The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 6 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits, larger spaces and all general lighting applications.
- SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
- EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 6.3-inches. Trim size: 7-inches.
- LIGHT SPECS: 65W equivalent Integrated LED using only 12W – bright 800 lumens – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – 105 degree beam angle – 50 000-hour (34 year) lifespan – Energy Star Certified.
- WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
- IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
- DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
- ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
Every item checked for quality -
Hampton Bay 3-Light Brushed Nickel Ceiling Fan Shades LED Light Kit
$29.96 $16.48This 3-light ceiling fan light kit is an ideal choice for replacing worn or outdated fan lights. With the included long-lasting LED light bulbs, the light kit produce bright illumination and eliminate the need to change bulbs in hard-to-reach ceiling fans. Featuring white frosted glass shades and elegant brushed nickel finish, this light kit goes well with a variety of indoor ceiling fan styles.
- Compatible with most standard 42 in. to 52 in. indoor ceiling fans with a center hole in the housing cap.
- Traditional light kit design pairs well with a variety of indoor ceiling fan styles.
- 3-light cluster style light kit with frosted glass shades provides bright illumination.
- Includes 3 energy-efficient 5-Watt A15 LED light bulbs equivalent to 40-Watt incandescent bulbs.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality
