Every item checked for qualityShowing 1–9 of 260 results
-
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality -
HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant
$27.47 $15.11Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.
- Title 20 compliant, can be shipped to California locations.
- ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
- Includes black and white baffle attachments, extra regression for better glare control.
- Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
- White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
- Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
- 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Wet rated, can be used in shower and outdoor light applications.
- Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
- Mountable using friction blades (included).
- Rated for use with IC and non-IC rated housings.
- 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
Every item checked for quality -
Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount
$27.27 $15.00
Original Retail Price: $33.00.
The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.
- Simple installation to steel mounting plate.
- Light weight polycarbonate luminaire construction.
- Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
- Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
- Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
- Suitable for use in IC or non-IC applications.
- Meets California title 24 JA8-2016 and is ENERGY STAR listed.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt
$45.49 $25.02The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.
- Mower blade drive belt.
- For MTD/Cub Cadet and Toro/wheel horse riding mowers.
- Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
- Kevlar cords are durable and long lasting.
Every item checked for quality -
Defiant Wired Doorbell Tri-Volt Transformer
$29.98 $16.49This Defiant Branded Tri-Volt Wired Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design with 3 options for electrical output: 8-Volt AC/10-Volt A, 16-Volt AC/10-Volt A or 24-Volt AC/20 VA. The transformer secures to knockout hole in junction box with included lock nut clamp.
- Tri-volt/clamp-on type.
- Input: 120-Volt AC.
- Output: 8-vac/10-va, 16-vac/10-va or 24-vac/20-va.
- Works with any wired door chime.
Every item checked for quality -
Orbit 1 in. FPT Auto Inline Valve
$15.96 $8.78Designed and optimized for trouble-free operation, Orbit’s Heavy Duty 1 in. In-Line Sprinkler Valve combines the latest in innovation to create a workhorse valve for residential sprinkler systems. Soft-close design reduces water hammer and wear on the system. Reverse flow fail-safe design prevents flooding. Captured lid screws and solenoid plunger, and attached diaphragm spring make maintenance easy and simple. Replaces all major brands of sprinkler valves. For use with outdoor cold water irrigation systems.
- Lid screws will work with flat head or Philips screwdriver, as well as a 5/16 socket.
- Spring attaches to diaphragm to reduce the chances of losing it.
- Captured plunger solenoid.
- Diaphragm post for easy realignment.
- 1 in. female-threaded valve.
- Inline valve works with standard residential 24-Volt sprinkler systems.
- For outdoor use with cold water only.
- For irrigation applications only.
- Compatible with all 24V systems.
- Soft-close design reduces water hammer.
Every item checked for quality
