Showing 1–9 of 260 results
Filters-
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
-
Master Flow 12 in. x 12 in. to 8 in. Ceiling Register Box
The Master Flow 12 in. x 12 in. x 8 in. Ceiling Register Box is made of 30-Gauge galvanized steel. It creates a transition from round pipe or insulated flexible duct to an air register or grille. The ceiling register box can be installed with sheet metal screws. It has a maximum temperature rating of…
Every item checked for quality -
Toro TimeCutter SS 50 in. Deck Belt
This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.
- Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
- Same as part # 119-8820.
- Kevlar corded aramid fiber belt for superior durability.
- Genuine Toro part.
-
Juno 75-Watt Flared Steps Satin Chrome Track Lighting Head
The Juno Trac-Lites Flared-Step Track Light offers a contemporary shape. It provides exceptional task and accent lighting when installed on the economical Juno Trac-Lites system. The perfect blend of form, function and value, this fixture features a durable, drawn-steel housing with a high-quality satin chrome finish.
- Bulb NOT Included.
- Drawn-steel track light housing with satin chrome finish is durable and attractive.
- 90° vertical aiming capability and 358° rotation permit light-beam adjustment for virtually any task or accent lighting application.
- Spring-loaded locking latch on mounting adapter provides secure attachment of fixture to track.
- Patented, embossed polarity arrow on bottom of mounting adapter assures proper electrical connection.
-
ROPPE Vinyl Self Stick Almond 4 in. x 0.080 in. x 20 ft. Wall Cove Base Coil
Low cost and good looks highlights ROPPE’s Type TV thermoplastic Vinyl base. It’s extremely durable without sacrificing attractiveness, and very economical because it’s made from PVC Vinyl. With its moderate pricing and beautiful color palette, our Vinyl wall base is an outstanding selection 4 any installation.
- Original retail price: $25.71.
- Withstands scratches/scuffs from daily wear.
- Superior durability for indoor commercial or residential use.
- Uniform height helps conceal floor and wall irregularities.
- Ribbed back for easy adhesion.
- Homogeneous color is inherent through the base and superior finish resists scuffing gouging and most chemicals.
- Intended for commercial or residential use.
- 20 ft. coil.
- Almond in color.
-
Residential Duty 3-1/2 x 3-1/2 Hinge – 1/4 in. Radius Corner – Lacquered Oil Rubbed Bronze
- Manufacturer: SGS/EL & EL Wood Products.
- Style: Traditional.
- Type: Butt hinge-1/4 in. radius.
- Material: Steel.
- Color/Finish: Bronze/oil rubbed.
- Size: 3-1/2″ x 3-1/2″.
- Width: 3-1/2″.
- Residential Weight hinges warranted for life of the opening.
- Does Not Include Wood Mounting Hardware.
-
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.