Every item checked for qualityShowing 1–9 of 260 results
-
Hampton Bay Wickford 1-Light Weathered Bronze Outdoor Pendant Light Fixture with Clear Beveled Glass
$49.96 $27.48The Wickford Collection from Hampton Bay features transitional, American style outdoor lighting suitable for a wide range of home styles from traditional to farmhouse. The Wickford outdoor hanging pendant light is designed to bring functional lighting to covered patio and porch spaces. This fixture has clear beveled glass sides and matching beveled glass roof panels. A single light bulb inside the fixture body can be easily accessed through the open bottom, and shines out brightly from inside the glass. A matching weathered bronze chain is included that allows for an adjustable height and slope ceiling compatibility. Shop the Wickford Collection for coordinating exterior lighting fixtures.
- Weathered bronze finish with clear, beveled glass.
- Uses (1) medium E26 base 100-watt bulb, not included.
- LED light bulb compatible, use 100-watt equivalent.
- Fixture is open at the bottom to allow for easy light bulb access.
- Installation instructions and hardware included.
- Includes 5-ft. chain for an adjustable height up to 73.6-in.
- Can be used on a sloped/angled outdoor ceiling.
- Round ceiling canopy measures 5-in. diameter.
Every item checked for quality -
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
Delta Simplicity 20 in. Sliding Shower and Bathtub Door Handles in Chrome
$29.00 $15.95When it comes to your home, you want updates that add value, enjoyment, and last years. This Simplicity handle is part of the Delta 1-2-3 custom sliding shower door program.
- FUNCTIONAL: Includes (1) 20″ bar handle for added towel storage and 2 knobs.
- COMPATIBLE PARTS: Use only with Delta frameless glass shower panels and Delta shower door tracks (sold separately).
- SIMPLICITY HANDLES: Simple horizontal handle and two coordinating knobs, with a beautiful opening price point.
- DURABLE: Made from zinc posts with an aluminum bar for strength, durability, and resistance to rust and corrosion.
- FINISH: Chrome finish creates a bright, highly reflective, cool metallic look.
- NOT INCLUDED: Delta tracks and glass panels sold separately.
- INSTALL: Step-by-step instructions and mounting hardware included for an easy installation.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality -
Toro TimeCutter SS 50 in. Deck Belt
$59.38 $32.66This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.
- Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
- Same as part # 119-8820.
- Kevlar corded aramid fiber belt for superior durability.
- Genuine Toro part.
Every item checked for quality -
Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector
$34.64 $19.05With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.
- 6-outlet.
- 8 ft. 14-Gauge cord.
- 1500-jouels.
Every item checked for quality -
Venti Air 24 in. x 24 in. T-Bar Drop ceiling Lay in Supply diffuser with round 14 in. collar/neck
$67.13 $36.923 cone air diffuser is for T-Bar, Drop Down, Lay in ceilings. 2-1/2 in. high grooved collar makes installation easier and faster. Optional damper sits in the groove.
- Distance between the cones is adjustable and works well with variable air flow patterns.
- Surface mounted or suspended grid system installation.
- Made of steel and white powder coated for durability and smooth glossy finish.
- If need the white color is easy to paint over.
- Outside dimensions are 23.75 in. x 23.75 in.
- California residents see Prop 65 WARNINGS.
Every item checked for quality
