Every item checked for qualityShowing 1–9 of 260 results
-
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
3/4-in 90-Degree Schedule 40 PVC Conduit Elbow Conduit Fittings
$1.58 $0.87This is a piece of schedule 40 conduit which has been heated and bent to effect a 90° change in direction in a conduit run.- Schedule 40 nonmetallic PVC construction for strength and durability.
- For indoor or outdoor use.
- Suitable for above ground or can be buried.
- Bell end for easy installation.
- ETL listed conforms to UL 651 and NEMA TC-3 conforms to UL 651 and NEMA TC-3.
Every item checked for quality -
Home Decorators Collection 1.5 in. W x 2 in. H Titanium Cube Decorative Shelf Bracket
$13.98 $7.69The Titanium Cube Decorative Shelf Brackets (2-Pack) are adjustable to fit thicknesses of up to 1/2 in. The brackets feature steel construction with a titanium finish. The Cube bracket, when properly installed, will support up to 22 lbs. per pair.
- Titanium finish.
- Steel construction.
- Use to support decorative wall shelving (sold separately).
- Supports up to 22 lbs. per pair when properly installed.
- Adjustable to fit shelf thicknesses of up to 1/2 in.
Every item checked for quality -
Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee
$78.40 $43.12The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).
- Intended for point of use/under sink installations to provide safe outlet water temperature.
- Ideal for individual faucets and electronic faucets.
- ASSE 1070 approved.
- Listed by ASSE, CSA, IAPMO.
- Accurate temperature control with flows as low as 0.25 gpm.
- Robust, low complexity design and total flow shut-off if cold supply fails.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box
$25.98 $14.29WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.- Model #SC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide a degree of protection against contact with the enclosed equipment.
- ANSI-61 gray polyester powder inside and out.
- Removable concentric knockouts on all four sides.
- Mounting holes provided on back of enclosure.
- Cover easily removed without extracting cover screws.
Every item checked for quality -
Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector
$34.64 $19.05With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.
- 6-outlet.
- 8 ft. 14-Gauge cord.
- 1500-jouels.
Every item checked for quality -
Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount
$27.27 $15.00
Original Retail Price: $33.00.
The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.
- Simple installation to steel mounting plate.
- Light weight polycarbonate luminaire construction.
- Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
- Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
- Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
- Suitable for use in IC or non-IC applications.
- Meets California title 24 JA8-2016 and is ENERGY STAR listed.
Every item checked for quality
