Every item checked for qualityShowing 1–9 of 260 results
-
-
1-1/2 in. Straight Non-Metallic Connector
$11.82 $6.501-1/2 in. Straight Connector for use with non-metallic liquid-tight conduit. Only type B may be used. It is produced from UV rated plastic for long outdoor life.
- May be secured to conduit while fully assembled because of a sno-spin ferrule.
- Simply loosen nut and screw onto conduit.
- Liquid-tight seal provided by our pressure sensitive internal gland when the nut is tightened.
- Liquid-tight seal is also assured between fitting and box by a sealing ring.
Every item checked for quality -
Greenworks PRO 60V Dual Port Turbo Charger
$137.00 $75.35Our 6.0 Amp hour (Ah) battery charger is designed to charge all Greenworks 60-Volt tools. Charges includes a diagnostic LED indicator communicating current charge level, battery temperature and indicate battery issues.
- Simultaneously charges 2 batteries.
- Compatible with all Greenworks 60-Volt batteries.
- Can be used bench top or mounted on the wall.
Every item checked for quality -
Steel City 1-Gang 4 in. Handy Box Cover (Case of 25)
$22.75 $12.51This 1-Gang Blank Utility Box Cover is made of durable steel with a galvanized finish for corrosion resistance. It is 1/4 in. raised. To ensure safety, it is both UL and CSA Listed.
- Model # 58C1-25R.
- Corrosion-resistant galvanized steel.
- 4 in. W x 2-1/8 in. H.
- UL and CSA Listed.
- For indoor use.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker
$24.98 $13.74The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.
- Red brass construction, nickel plated for protection from extreme weather.
- Drains water from faucet upon shut off.
- For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
- Red brass with 80-83% copper content.
- For outdoor use; not for potable water.
- ASSE 1019 approved; IAMPO certified.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
Toro TimeCutter SS 50 in. Deck Belt
$59.38 $32.66This is a Kevlar corded aramid fiber belt. Genuine Toro parts ensure your Toro mower performs as it’s intended by providing the perfect fit and maximum performance. This belt fits 50 in. TimeCutters model years 2011 and newer.
- Replacement deck drive belt for use on 50 in. TimeCutter manufactured in 2011 and later.
- Same as part # 119-8820.
- Kevlar corded aramid fiber belt for superior durability.
- Genuine Toro part.
Every item checked for quality
