Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
Green checkmark of qualityEvery item checked for quality

Showing 1–9 of 260 results

Filters

  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • SunTouch Floor Warming 72 in. x 30 in. 120-Volt Radiant Floor Heating Mat

    This 120 volt 6 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.

    • Energy efficient, inexpensive to operate.
    • Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
    • Single point power connection makes layout and wiring a snap.
    • Armored power lead, wire straight to the electrical box, no conduit required.
    • Heat-up times are generally 30-45 minutes for framed floors, slabs take longer.
    • High-quality heating cable made with oxygen-free copper heating element surrounded by ETFE insulation and a braided metal grounding jacket.
    • Power lead is color-coded green (ground), black (power), and white (neutral).
    • SunTouch is made in the USA and tested by the Tile Council of America.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $189.00 $103.95

  • HGN Metal Faucet Glass Rinser for Kitchen Sink in Brushed Nickel

    • Original retail price: $55.29/$65.99.
    • Brushed Nickel finish can be matched perfectly with your kitchen environment. Multi-angle water outlet cleaning head has multi-angle spraying holes that effectively wash your cup, saving time and effort – convenient and practical.
    • From wine glasses to baby bottles to travel cups, it conveniently rinses virtually any drinkware, so you can spend less time soaking and scrubbing. Brushed Nickel finish resists water spots and fingerprints.
    • Put the mouth of the cup downward and press the bottom of the cup lightly to automatically spray water for cleaning. When the cup is cleaned, remove the cup and stop spraying water.
    • Simple DIY replacement for a soap dispenser, kitchen sprayer or sink hole cover – the perfect complement to your kitchen faucet. It only takes a few minutes to install our glass rinser all by yourself.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75

  • SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit

    The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

    • Lead free DZR brass construction for durability and reliability.
    • Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
    • Innovative push-to-connect design makes for quick and easy installation.
    • Push-to-connect fittings require no solder, glue, unions, or tools.
    • Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
    • Designed for potable water distribution as well as hydronic heating applications.
    • Corrosion resistant to improve longevity.
    • Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
    • Meets all UPC, IPC and cUPC requirements.
    • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
    • Rated to 200°F and 200 psi.
    • Rated to 200°F and 200 psi.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00

  • 1-1/2 in. Center Stop PVC Coupling Conduit Fitting

    This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.

    • Connects conduit of the same diameter.
    • Non-corrosive PVC construction.
    • Joins metal conduit to PVC conduit or PVC to PVC.
    • UL and CSA safety listed for greater safety and peace of mind.
    Green checkmark of qualityEvery item checked for quality
    $1.51 $0.83

  • Hampton Bay 1-Light White R30/par30 Large-Step Linear Track Lighting Head

    This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton…

    Green checkmark of qualityEvery item checked for quality
    $25.40 $13.97

  • KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)

    The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93
X