Every item checked for qualityShowing 1–9 of 260 results
-
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
Honeywell Home 1-Week Programmable Thermostat with Digital Display
$29.98 $16.49The Honeywell Home 1-Week Programmable Thermostat has a simple interface and offers one basic program for the entire week with 4 program periods. It automatically adjusts the heating or cooling of your home so you are comfortable when you wake up, come home or at any other time you prefer. Simple step-by-step instructions included with the thermostat make DIY installation easy.
- 1 basic program for the entire week.
- Easy to use, basic operation makes programming easy.
- Precise +/- 1 Degrees F temperature control.
- Easy to install.
Every item checked for quality -
Halex 3 in. Rigid Conduit Coupling
$14.20 $7.81Extend a run of conduit with the Halex 3 in. Rigid or IMC Conduit Coupling. This galvanized fitting is female-threaded. It can be used indoors or outdoors.
- Joins 2 lengths of threaded rigid or IMC conduit.
- Galvanized steel resists corrosion.
- UL listed.
- For indoor or outdoor applications.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality -
allen + roth Chocolate 12-in x 12-in Glazed Ceramic Uniform Squares Wall Tile (0.96-sq. ft/ Piece)
$3.64 $2.00allen + roth glazed ceramic collection pays tribute to the classic subway tiles with a modern color palette. Affordability and versatility are key in this collection where your imagination is your own limitation. This collection features trim pieces, 3 x 6 and 4 x 12 field tiles as well as 6 x 6 ogee tiles, and mosaics.
- An artisan handmade feel with traditional and contemporary influences.
- An incredible soft translucent glaze with a delicate modern architectural character.
- A wonderfully current and saturated color palette.
- Semi-vitreous indoor tile is highly resistant to staining and scratching.
- Scratch-resistant, durable and is easy to clean for hassle-free upkeep.
- 11.81-in W x 11.77-in L x 8 mm covering 0.96 square feet.
Every item checked for quality -
Open Box – Sterling Wall Mounted Shower Caddy in White Finish (10-Piece)
$54.55 $30.00STORE+ is a fully customizable storage bath or shower system with interchangeable accessories to eliminate clutter and organize your shower to fit your needs. Interchangeable corner accessories maximize your showering space. Dishwasher safe shelves and bins.
- Open Box: Missing hooks; other parts are in perfect condition.
- Original Retail Price: $99.00.
- Model# 88028700-0.
- STORE+ accessory kits meet your storage and organizational needs.
- Basic accessory kit includes: 2 caddies, 2 soap dishes with towel bars, 2 hooks, 4 rimmed shelves.
- Interchangeable corner accessories, maximize storage space- the way you want.
- Dishwasher safe shelves and bins snap into place, no tools required.
- Constructed of plastic.
- White finish on all pieces.
Every item checked for quality -
Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve
$70.00 $38.50This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.
- Anti-siphon protection.
- Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
- EPDM rubber packing helps prevent leaking behind the packing nut.
- Stainless-steel seat to help prevent wire draw.
- Full-circle operating threads on the valve body and retainer for a secure fit.
- Powder-coated die-cast aluminum oval handle for strength.
- Standard O size seat washer.
- Adjustable polycarbonate wall flange.
- No-lead solder.
- Brass construction.
- 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
Every item checked for quality -
2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub
$21.40 $11.77Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.
- Sold as: Single unit.
- Trade Size: 2 in.
- Insulated throat.
- Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
- Assembled with 150° rated insulator.
- Oversized locknut provides vibration-proof.
- Wet or Dry Locations.
- Primary Material: Zinc Die Cast.
Every item checked for quality
