Green checkmark of qualityEvery item checked for quality

Showing 1–9 of 260 results

Filters
  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Master Flow 12 in. x 12 in. to 8 in. Ceiling Register Box

    The Master Flow 12 in. x 12 in. x 8 in. Ceiling Register Box is made of 30-Gauge galvanized steel. It creates a transition from round pipe or insulated flexible duct to an air register or grille. The ceiling register box can be installed with sheet metal screws. It has a maximum temperature rating of…

    Green checkmark of qualityEvery item checked for quality
    $23.64 $13.00
  • Apollo 1/2 in. and 3/4 in. PEX-B SS Sleeve Tool

    The ApolloPex Combo PEX Stainless Steel Sleeve Tool is a 2-in-1 tool designed to secure 1/2 in. and 3/4 in. stainless steel sleeves (not included) into place within PEX piping systems. There are no loose components, jaws to change, or adjustments to be made to create either size connection. Connections may be checked for security using the Go/No-Go Gauge (included). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with 1/2 in. and 3/4 in. stainless steel sleeves (not included).
    • Creates a secure dual crimp at each connection.
    • Contoured, comfort-grip handles accommodate gloved and bare hands.
    • Hardened steel construction ensures reliability and durability.
    • Factory calibrated to ensure proper connections right out of the box.
    • Smooth actuation mechanism allows secure connections with minimal force required.
    • Secures sleeves into place with dual crimping action.
    Green checkmark of qualityEvery item checked for quality
    $59.38 $32.66
  • RACO 1/2 in. Uninsulated Liquid-Tight Connector, 1-Pack

    Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.

    • Steel and malleable iron construction provides raceway integrity.
    • Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening.
    • Locknut provided.
    • Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations.
    Green checkmark of qualityEvery item checked for quality
    $3.31 $1.82
  • KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)

    The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.

    • Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
    • 100° detection angle.
    • Daylight sensor keeps daytime motion from triggering the lights.
    • Easily deactivate sensors to allow for constant 24/7 bulb operation.
    • Switch lights ON for normal motion sensor mode.
    • Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
    • Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
    • 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
    • 1200 Lumens each bulb.
    • Not for use with existing motion sensor fixtures.
    • Light appearance: 3,000K (bright white).
    Green checkmark of qualityEvery item checked for quality
    $19.87 $10.93
  • Orbit 3/4 in. or 1 in. Green Jar Top Valve

    Orbit’s Jar Top Valve features an easy-access screw-top lid that makes service a snap. This simple and reliable design includes manual operation and a standard 24-Volt solenoid for connection to an irrigation timer. Orbit’s Inline Valve is designed to prohibit the free flow of water from a ruptured diaphragm and reduces potential water waste and flooding damage. The manual on/off bypass lever is ideal for testing and flushing sprinkler lines. The Inline Valve works with standard residential 24-Volt sprinkler systems.

    • Threaded easy-access jar-top lid design for easy serviceability.
    • Heavy-duty construction with stainless steel components provides years of reliable service.
    • Compatible with standard 24-Volt sprinkler systems.
    • Manual on/off bleed screw for testing and flushing sprinkler systems.
    • Work on 3/4 or 1 sprinkler systems.
    • For outdoor use only.
    • For cold water use only.
    • For irrigation use only.
    • Dependable design.
    • Made of durable, long lasting materials.
    Green checkmark of qualityEvery item checked for quality
    $13.96 $7.68
  • Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve

    The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

    • Eliminates risk of over-pressure of storage tanks.
    • Epoxy-coating adds extra protection.
    • Pressure relief valve set at 150 psi.
    • CSA Compliance to ANSI Z21.22/CSA 4.4.
    • Certified to ASME Section IV by National Board.
    • Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
    Green checkmark of qualityEvery item checked for quality
    $37.40 $20.57
  • Orbit 3/4 in. Automatic Converter Valve

    The automatic converter valve allows you to transform an existing manual valve into a fully automatic valve. The converter valve fits the threads in most makes of manual valves, including manual anti-siphon valves. Brass threads ensure reliable installation and high durability. The valve features a 24 VAC solenoid, manual actuation lever, bleed screw, and flow control. In cases where there is no existing sprinkler wire running to the valve, the Orbit battery-powered controller provides a simple way to power up to four valves in a single location. The automatic converter valve is compatible with all major brands of 24 VAC irrigation controllers. We recommend B-hyve controllers for optimum water conservation and PVC-Lock fittings for fast, glue-free installation. For outdoor irrigation use with cold water only.

    • Compatible with controllers from Orbit, Hydro-Rain, and other major brands.
    • Brass threads with valve bodies available in both PVC and brass body versions.
    • Valve features 24 VAC solenoid, manual actuation lever, and flow control.
    • Heavy-duty construction with UV resistance for durability and longevity.
    • For converting a manual irrigation valve into an automatic irrigation valve.
    • Control with a B-hyve smart controller for optimum water conservation.
    • Includes a ring adapter.
    • For outdoor use with cold water only.
    • For irrigation applications only.
    • Flow-control adjustment.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73
  • Hampton Bay 1-Light Black R20/PAR20 Medium-Step Linear Track Lighting Head

    This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton Bay, Commercial Electric or H/EC (3 BUS) track lighting system that you already have installed.

    • Durable metal construction is built to last and offers a clean, refined look.
    • Multi-directional to provide a customized direction of light.
    • Requires 1 medium based, 60-Watt MAX, R, PAR or BR light bulb (sold separately).
    • Compatible with most standard 120-Volt incandescent style dimmer switches (verify bulb requirements when using LED).
    • 100% compatible with all 120-Volt Hampton Bay, commercial electric EC/H series, 3 BUS linear track systems, components and accessories.
    • Requires a 3 BUS, EC/H series track section and power feed to operate (sold separately)
    • Easy to follow instructions.
    Green checkmark of qualityEvery item checked for quality
    $13.96 $7.68
X