Showing 82–90 of 260 results
-
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
SunTouch Floor Warming 8 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 20 sq. ft.)
$239.00 $131.45This 120 volt 8 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.
- Energy efficient, inexpensive to operate.
- Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
- Single point power connection makes layout and wiring a snap.
- Armored power lead, wire straight to the electrical box, no conduit required.
- Armored power lead wire straight to the electrical box, no conduit required.
- Single-point power connection to facilitate layout and wiring.
- Mats can be connected in parallel for larger floor surfaces.
- Can be combined with a thermostat control (not included).
Every item checked for quality -
1-1/2 in. Center Stop PVC Coupling Conduit Fitting
$1.51 $0.83This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.
- Connects conduit of the same diameter.
- Non-corrosive PVC construction.
- Joins metal conduit to PVC conduit or PVC to PVC.
- UL and CSA safety listed for greater safety and peace of mind.
Every item checked for quality -
Rino-Tuff Universal Fit Weight Absorbing Flex Trimmer Strap for Grass String Trimmer, Blower or Sprayer
$14.96 $8.23The Universal Flex Strap by Rino-Tuff is a comfortable bungee trimmer strap with an adjustable shoulder pad that distributes weight evenly over your back and legs. The quick connecting clip makes it easy to attach the strap to any trimmer, blower, or sprayer. The clip houses a built-in trimmer line cutter and a slot with ear plugs. The bungee strap helps extend your reach while the thick shoulder pad absorbs the shock felt while trimming. With less weight on your body, you can trim for a longer amount of time and reduce muscle fatigue. That means cutting more with less strain to get the job done faster, leaving you more time to do the things you want.
- Fits all trimmers, blowers, and sprayers.
- Reduces strain and muscle fatigue.
- Thick adjustable shoulder pad.
- Quick and easy connecting.
- Built-in line cutter and slot with ear plugs.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
1″ PVC Coupling Male Terminal Adapter
$1.15 $0.63Lightweight yet offers high impact and tensile strength. Chemical resistant to a wide range of acids, alkalis or salt solutions. Corrosion resistant for lower maintenance cost and longer life. PVC is nonconductive eliminating dangerous second point of contact.
- Brand: Kraloy Fittings.
- Part Number: TA10.
- KSCdirect Part: Coup 1.
- Description: 1 Conduit Coup.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 8 in. x 8 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$59.98 $32.99WIEGMANN 8 In. x 8 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC080804RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
RACO 1/2 in. Uninsulated Liquid-Tight Connector, 1-Pack
$3.31 $1.82Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.
- Steel and malleable iron construction provides raceway integrity.
- Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening.
- Locknut provided.
- Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations.
Every item checked for quality
