Showing 91–99 of 260 results
-
WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box
$25.98 $14.29WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.- Model #SC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide a degree of protection against contact with the enclosed equipment.
- ANSI-61 gray polyester powder inside and out.
- Removable concentric knockouts on all four sides.
- Mounting holes provided on back of enclosure.
- Cover easily removed without extracting cover screws.
Every item checked for quality -
InSinkErator Indulge Modern Series 1-Handle 9.25 in. Faucet for Instant Hot Water Dispenser in Matte Black
$454.69 $250.08This InSinkErator Indulge Modern Instant Hot Water Dispenser for use with our Stainless Steel Tank (sold separately) model provides filtered 200F near-boiling water for a variety of uses. The InSinkErator Modern instant hot water dispenser is perfect for any cooking connoisseur. The Indulge Modern instant hot water dispenser features stunning clean lines, blending efficiency and style. Designed for use with the re-engineered InSinkErator Stainless Steel Tank and Filtration System, enjoy hot, filtered water right when you need it – now.
- Compatible with InSinkErator Stainless Steel Hot Water Dispenser Tanks & Filtration Systems (sold separately).
- Graceful, high-arch swivel spout makes filling pots & pitchers quick and easy.
- Durable brass faucet dispenses near-boiling water up to 200°F.
- Hot water lever automatically shuts off when not in use.
- For use with the InSinkErator stainless steel tank and filtration system (sold separately).
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
interhasa! Electric Hand Dryer for Commercial Bathrooms
$329.00 $180.95- UPDATED 3rd GENERATION HAND DRYER — This updated Jet hand dryer uses a more powerful main board, thinner cover design, lower noise, and lower power consumption technology. High quality ABS Material and updated structure ensures the product’s life time. Its elegant design makes it a premium decor for all commercial bathrooms.
- HIGH SPEED HAND DRYER – Double-sided Jet design with ultra high speed. 1800 Watts 95m/s air dryer, fast drying within 5-7 seconds, 3 times faster than compact hand dryers. Its speedy dry time and highly refined design creates a refreshing lifestyle and better customer experience in a high traffic area.
- HEPA FILTER – This bathroom hand dryer with built-in high quality HEPA filter is more hygienic. It cleans the air and provides absolutely pure air flow. The detachable air filters can also prevent dust from entering the machine, which also can promise the long life of the air hand dryer.
- LOWER NOISE & ENERGY CONSUMPTION – This electric hand dryer dries hands in less than 7 Seconds using 80% less energy than Normal warm Hand Dryer. Largely saves Electricity and Costs less to run. The best Hand Drying alternative for any environment with 70% smaller carbon footprint than Paper Towels.
- WALL MOUNTED & EASY INSTALLATION – With a modern and sleek design, this jet hand dryer is suitable for public school, hospital, star hotels, airports, shopping malls, restaurant, and other consistently high-traffic restrooms.
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Daylight (2-Pack)
$21.96 $12.08The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 5,000K (daylight).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
Novolink Wirelessly Connected Battery Operated Black LED Spotlight with Outdoor Motion Sensor
$44.96 $24.73The Wireless Motion Sensor plus Battery-Powered Spotlight is an excellent combination for adding a motion-sensing light to your outdoor environment. When motion is detected by the Motion Sensor, it activates the Spotlight (which can be placed up to 50 ft. away), providing light and security in dark spots of your landscaping or additional light when receiving visitors or strolling outside. The motion sensor and Spotlight combination can be added to your existing Lightscape Smart Controller for additional functionality. When your regular landscape lights are not on, the Motion Sensor and Spotlight can provide much needed motion-activated light coverage and can be set to activate on the included timer. It’s easy to add additional Spotlights or Motion Sensors to your Lightscape app, available for most Android and iOS smartphones. The app allows you to set multiple timers for your lights, activate them by motion-detection and manage lighting in different zones of your landscaping, such as Front Yard, Pool Area and Patio.
- Combo includes 1 wireless, battery-powered motion sensor with wall mount and 1 wireless battery-powered spotlight with both wall mount and garden stake.
- Works with Apple iOS and Android smartphones with the Lightscape app.
- Use the combo only or combine with your existing Lightscape wireless controller for additional functionality, you can add additional spotlights and sensors to the various zones in your system.
- Weather-resistant.
Every item checked for quality -
Cap A Tread Bennett Valley Oak/Kettle Hill Oak 47in.Lx12.15in.Wx2.28in.T Vinyl Stair Tread and Reversible Riser Kit Adhesive
$66.96 $36.83Cap A Tread is a durable, seamless stair tread cover that is easily glued down over your existing stair treads. Use Cap A Tread to renew your stairs in a day to a fresh new look! Coordinates with many vinyl and laminate plank flooring colors.
- Buy the correct size for your existing treads: 1.69 in. Thick Cap A Tread will cover existing stair treads up to 1.3 in. thick; 2.28 in. Thick Cap A Tread will cover existing stair treads up to 1.9 in. thick.
- Cap A Tread adds character to your stairs, product visuals are designed to closely coordinate with flooring as there may be slight color and texture variation.
- Durable, seamless cover laminated over MDF.
- Coordinates with many flooring types and thicknesses, including vinyl and laminate plank flooring.
- Easy glue down installation to coordinate stairs with your floor.
- Designed to coordinate with many flooring colors, or can be used as a standalone retrofit for an existing stair finish, such as carpet.
- Allows the customer to achieve a great new look that is affordable.
- Cap A Tread fits over existing treads without having to modify them.
- Simply cut to fit and glue over the existing stair tread.
- For residential and light commercial use; interior use only.
- Easy to clean with just a damp cloth.
- Tread and riser kit includes a reversible riser that is white on one side and matching color on the other.
- Proudly manufactured by Zamma Corporation.
- Use only urethane based adhesive to install Cap-A-Tread.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality
