Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 11

Showing 91–99 of 260 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64

    BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering OT glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Husky 2 in. Ratcheting PVC Cutter

    Husky’s 2 in. Quick Change Ratcheting Cutter tackles PVC, CPVC, Polypropylene pipe, PEX and Polyethylene pipe up to 2-3/8 in. outer diameter (2 in. inner diameter). The ratcheting action features quick change blade mechanism for added user convenience.

    • Cuts up to 2 in. PVC (or 2-3/8 in. O.D.).
    • Perfect addition to your toolbox.
    • Quick-change blade mechanism.
    Green checkmark of qualityEvery item checked for quality
    $26.82 $14.75

  • Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee

    The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).

    • Intended for point of use/under sink installations to provide safe outlet water temperature.
    • Ideal for individual faucets and electronic faucets.
    • ASSE 1070 approved.
    • Listed by ASSE, CSA, IAPMO.
    • Accurate temperature control with flows as low as 0.25 gpm.
    • Robust, low complexity design and total flow shut-off if cold supply fails.
    Green checkmark of qualityEvery item checked for quality
    $78.40 $43.12

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Frost King E/O 3/8 in. Dia Contractor Pack Caulk Backer Rod

    The Thermwell Products 3/8 in. Dia Caulk Saver Contractor Pack helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings. Use to back fill large gaps before applying caulk (caulk sold separately). Helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings.

    Green checkmark of qualityEvery item checked for quality
    $31.27 $17.20

  • allen + roth Chocolate 12-in x 12-in Glazed Ceramic Uniform Squares Wall Tile (0.96-sq. ft/ Piece)

    allen + roth glazed ceramic collection pays tribute to the classic subway tiles with a modern color palette. Affordability and versatility are key in this collection where your imagination is your own limitation. This collection features trim pieces, 3 x 6 and 4 x 12 field tiles as well as 6 x 6 ogee tiles, and mosaics.

    • An artisan handmade feel with traditional and contemporary influences.
    • An incredible soft translucent glaze with a delicate modern architectural character.
    • A wonderfully current and saturated color palette.
    • Semi-vitreous indoor tile is highly resistant to staining and scratching.
    • Scratch-resistant, durable and is easy to clean for hassle-free upkeep.
    • 11.81-in W x 11.77-in L x 8 mm covering 0.96 square feet.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • 2 in. PVC Fitting – Meter Offset (Standard Fitting)

    The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.

    • Brings electrical service into a meter box.
    • Non-metallic PVC is heat, fire and corrosion resistant.
    • Compatible with sch. 40 or sch. 80 conduit.
    • Ridges on the outside for concrete encasement.
    • UL Listed for safety and peace of mind.
    • Socket on 1 end with threads on offset for easy installation.
    Green checkmark of qualityEvery item checked for quality
    $5.35 $2.94

  • #11, STRM006BN, Brushed Nickel Spiraled Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006BN.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Brushed Nickel.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • Defiant Wired 16VAC/30VA Doorbell Transformer, Compatible with all Video Doorbells

    This Defiant Branded Wired 30VA Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design that is perfect for most wired doorbell installations. This 30VA transformer is compatible with smart video doorbells, Wi-Fi smart devices and more. ETL Certified to guarantee safety and quality.

    • Use to replace outdated or broken transformers.
    • Combine with your favorite wired chime and push button.
    • Perfect for homes with or without an existing doorbell.
    • Lock nut type.
    • Input: 120-Volt AC.
    • Output: 16-vac/30-va.
    • Works with any wired door chime.
    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98
X