Showing 91–99 of 260 results
-
ECHO YOUCAN Fuel System Kit 225 Series Models
$14.98 $8.24Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.
- Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
- For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
- Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
- Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
- Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
Every item checked for quality -
Hampton Bay 1-Light White R20/par20 Medium-Step Linear Track Lighting Head
$23.58 $12.97This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton…
Every item checked for quality -
1-1/2 MNPT PVC Terminal Conduit Adapter
$1.78 $0.98TA30 Scepter rigid PVC conduit pipe and fittings are non-sparking and non-conducting, thereby eliminating the most dangerous second point of contact and phase to ground faults. The use of a separate grounding conductor in a Scepter PVC conduit system gives a complete and positive ground for the whole system.
Every item checked for quality -
HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter
$10.13 $5.57The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
- Very high quality brass construction.
- 1/2 in. diameter.
- For use with HOME-FLEX CSST systems.
- For use with natural gas or liquid propane.
- CSA and IAPMO certified.
- Not for use with Home Flex UNDERGROUND poly tubing.
- HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
- Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
- CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
Every item checked for quality -
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
$24.98 $13.74Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality -
Halo HLBSL 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Kit
$13.87 $7.63Halo HLB4 Selectable Series Downlights are complete 4 in. ultra-thin canless recessed lights designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. Ultra-slim design goes where LED can lights can’t. Choose your color temperature directly on the fixture. With the flick of a switch, you can choose between 3 color temperatures ranging from warm (3000K) to daylight (5000K) prior to installing into your ceiling. This Halo recessed lighting fixture features an LED driver that offers 120-Volt dimming capability. The HLB4 LED recessed lighting soft lens provides uniform illumination and wet location listing.
- Housing and J-box not required, easy to install spring clips firmly secure recessed LED lights in ceiling.
- Repositionable driver junction box.
- Selectable CCT allows customization to create perfect lighting for your home all throughout your house.
- Choose between 3-discrete color temperature settings ranging from soft (3000K) to daylight (5000K).
- LED recessed lights with attractive round Halo matte white finish and textured lens to provide smooth light distribution.
- LED recessed lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs.
- LEDs have 35,000-hours of life, eliminating your need to use and replace bulbs.
- Good brightness at 675 Lumens (at 3000K color temperature) recessed lights provide illumination to any room.
- 90 CRI, title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Air-tite, wet rated recessed lights can be used in shower and outdoor light applications.
- Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
- Halo 4 in. LED lights are IC rated, for direct contact with insulation.
- 4 in. recessed lighting produces light equivalent to a 60-Watt bulb yet uses just 12-Watt (see product spec sheet to confirm).
- 1/2 in. D makes this product great for use in shallow ceilings.
- Fits into applications with as little as 3.5 in. plenum clearance.
- ENERGY STAR qualified for energy conservation.
Every item checked for quality -
Hampton Bay Alexandria 17.3 in. White Farmhouse 180-Degree Motion Sensor Outdoor 1-Light Wall Sconce
$89.96 $49.48Illuminate your outdoor area with the classic look of the Alexandria 180° Outdoor Motion Sensing Decorative Lamp. The white finish and beveled glass will perfectly match your home to provide a beautiful lighting appeal. The 180° motion sensor provides added safety and security around the perimeter of your home. The DualBrite technology allows your lantern to attractively accent the look of your home by coming on at a lower light level for your selected duration of 3 hours, 6 hours, or from dusk till dawn. DualBrite provides energy savings with 2 level lighting modes. Weather resistant for a long service life.
- DualBrite technology allows the light to come on half bright, to accent your home for a selected time after dusk (off, 3 hour, 6 hour, until dawn), selecting off disables this feature, the motion sensing features will continue to work as described, if motion is sensed, the light turns on full bright for the on-time (1, 5, or 10 minutes) then returns to dim mode.
- Durable weather-resistant metal housing and finish.
- 180° motion sensor ensures reliable activation when motion is detected, range of up to 30 ft.
- UL listed for wet locations.
- Accepts medium base-bulb, sold separately (100-Watt maximum).
- Wall-mount design can be easily installed to illuminate porches or other outdoor walled spaces making it perfect for front porches, garage fronts, or back porches/patio areas.
- Photocell keeps the light off during daylight hours, and the manual over ride feature allows the light to easily be kept on for outdoor events such as backyard parties.
- Operating temperature range: -25°C (-13°F) to +50°C (+120°F).
Every item checked for quality -
#7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve
$5.45 $3.00
The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.
- Compatible with iron pipe.
- Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
- One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- One-piece body construction for strength, durability and long-lasting performance.
- Chrome-plated brass.
- Temperature rating: 40 degrees to 160 degrees F.
- Pressure rating: 125 PSI maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality
