Showing 100–108 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Intermatic 40 Amp 60-Minute Indoor Wall Mounted Mechanical Water Heater Timer, Steel, Gray
$77.11 $42.41With the easy-to-set Yellow Dial, these time switches allow for basic control of electric water heaters. These time switches offer a minimum ON/OFF time of 1-hour and are available for 208-250 VAC applications. With the proven reliability of our mechanical line, these time switches provide dependable electric water heater control.
- 2-sets of on/off trippers.
- Enables shifting electricity use into off-peak hours to reduce energy costs.
- Convenient external override switch.
- Up to 12 on/12 pff events with the purchase of additional trippers (156T1978A).
- Metal indoor enclosure.
Every item checked for quality -
John Deere 42 in. Deck Drive Belt for Select John Deere Mowers
$55.96 $30.78When you need to replace your lawn mower belt consider the John Deere 42 in. Mower Belt for your mower. The more Kevlar cords help provide strength for your mower’s high horsepower demands. The flexible cores allow for proper routing so they stay in the pulley groove.
- For replacing your John Deere riding mower belts.
- Fits models: D100, D105, D110, D120, D125, D130, LA100, LA105, LA110, LA115, LA120, LA125, LA135, LA110, LA120.
- More Kevlar cords help provide strength for high horsepower demands.
- Belt cover provides a smooth blade and clutch engagement.
- Reduced belt rollover in pulleys helps ensure a longer belt life.
- GX20072 Cross-References to John Deere UC32883.
Every item checked for quality -
2 in. Rigid Metal Conduit (RMC) Water Tight Conduit Hub
$21.40 $11.77Topaz’s Water Tight Conduit Hub with Insulated Throats are used to secure or terminate threaded conduit to an unthreaded opening in a box or metal enclosure where a rain-tight, oil-tight or dust-tight connection is required. Insulated throat insulates conductors, prevents abrasion and thinning of conductor insulation, and reduces wire pull effort. Oversized locknut protects against damage from vibrations and promotes positive grounding. The threaded portion of the hub positions into a knockout and is locked in place with a locknut. Once in place, conduit can be threaded onto the hub. Hubs form a watertight seal, making them ideal for indoor and outdoor applications, including service entrance applications. All malleable construction ensures mechanical protection. Zinc-electroplated for added corrosion protection.
- Sold as: Single unit.
- Trade Size: 2 in.
- Insulated throat.
- Recessed neoprene O-ring assures rain-tight, oil-tight, or dust-tight connections.
- Assembled with 150° rated insulator.
- Oversized locknut provides vibration-proof.
- Wet or Dry Locations.
- Primary Material: Zinc Die Cast.
Every item checked for quality -
Clopay Garage Door Keyed Lock Set
$32.98 $18.14Provide additional security for your garage door with the Clopay Garage Door Keyed Lock Set. This lock set can be used for garage doors up to 18 ft. wide. It includes everything needed to replace the garage door lock system.
- Lock can be operated from inside or outside the garage.
- Includes 2 pre cut keys.
- Easily installs with a drill and screwdriver.
- Not recommended for use on doors with a garage door opener.
Every item checked for quality -
RUGPADUSA Essentials 8 ft. x 10 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$58.95 $32.42If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt made.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
EcoSmart 120-Watt Equivalent PAR38 CEC Motion Sensor Flood LED Light Bulb Daylight (2-Pack)
$21.96 $12.08The EcoSmart LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 25 ft. range and keeps lights on for 1-minute after the last detected movement. The sensor detection angle is 100. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor 25 ft. detection range.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 5,000K (daylight).
- California Energy Commission Title 20 Compliant LED Light Bulb.
Every item checked for quality -
Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve
$70.00 $38.50This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.
- Anti-siphon protection.
- Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
- EPDM rubber packing helps prevent leaking behind the packing nut.
- Stainless-steel seat to help prevent wire draw.
- Full-circle operating threads on the valve body and retainer for a secure fit.
- Powder-coated die-cast aluminum oval handle for strength.
- Standard O size seat washer.
- Adjustable polycarbonate wall flange.
- No-lead solder.
- Brass construction.
- 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality
