Showing 109–117 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
RUGPADUSA Essentials 8 ft. x 10 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$58.95 $32.42If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt made.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
30 in. W x 22 in. D x 35.4 in. H Bathroom Vanity in Navy Blue with Marble Stone Vanity Top in White with Single White Sink
$636.36 $350.00
Fantastic value and a modern design, maximize your bathroom space. This elegant navy blue vanity was constructed of solid oak and plywood for high quality with unique designed handles, soft-close glides and hinges. Italian carrara white marble top with under-mount sink which demonstrates quality construction and attention to details.
- Overall Dimensions are 30 in. W X 22 in. D X 35.4 in. H.
- Vanity is constructed with solid oak and plywood.
- Color for navy blue paint finish inside and outside.
- Unique designed golden zinc-alloy handles.
- 1 soft close drawer and 2 soft close doors.
- Carrara white marble top, top thickness is 1.2 in. (include back splash of 4″ height), pre-drilled 8 in widespread faucet hole.
- CUPC certified white porcelain under mount sink ( 20 in. x 14.9 in. x7.2 in.).
- Mirror and faucet are not included.
Every item checked for quality -
Powercare B74.063 – Saw Chain Zip Pack
$23.00 $12.65Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability. The Centri-lube self-lubricating drive links enhance chain life and also reduce stretch. The chain is Underwriters laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chain.
- Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability.
- Underwriters laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chain.
- Centri-lube self-lubricating drive links that enhance chain life and reduce stretch.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Hampton Bay 1-Light Black R20/PAR20 Medium-Step Linear Track Lighting Head
$13.96 $7.68This Hampton Bay Linear Track Lighting Head provides an abundance of light and sophistication to your interior space. It features a multi-directional lamp head to provide light to difficult places where light does not reach. A linear track section and power supply are required (sold separately) or use it as an add-on to a Hampton Bay, Commercial Electric or H/EC (3 BUS) track lighting system that you already have installed.
- Durable metal construction is built to last and offers a clean, refined look.
- Multi-directional to provide a customized direction of light.
- Requires 1 medium based, 60-Watt MAX, R, PAR or BR light bulb (sold separately).
- Compatible with most standard 120-Volt incandescent style dimmer switches (verify bulb requirements when using LED).
- 100% compatible with all 120-Volt Hampton Bay, commercial electric EC/H series, 3 BUS linear track systems, components and accessories.
- Requires a 3 BUS, EC/H series track section and power feed to operate (sold separately)
- Easy to follow instructions.
Every item checked for quality
