Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 14

Showing 118–126 of 260 results

Filters

  • HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim

    The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.

    • Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
    • Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
    • 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Flexible mounting with included junction box bracket.
    • ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
    • Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
    • Compatible with most 4 in. housings.
    • Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
    • Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
    • SLD retrofit kit sold separately.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73

  • ECHO YOUCAN Fuel System Kit 225 Series Models

    Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.

    • Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
    • For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
    • Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
    • Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
    • Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • QEP 4-1/8 in. Wide Economy Knee Kicker

    The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.

    • For small installations and fixing loose carpet.
    • Tighten loose carpet like a professional.
    • Lightweight aluminum and steel construction.
    • Great for hallways and closets.
    • Features a soft, foam comfort grip handle.
    • Triple nap grip design to hold carpet firmly.
    Green checkmark of qualityEvery item checked for quality
    $45.47 $25.01

  • Home Decorators Collection Alberson 5 in. Brushed Nickel 2-Light LED Sconce

    Contemporary lines, ultra-sleek and high quality elegant finishes. This 2-light features frosted acrylic diffusers, vertically seated on a chrome frame. This LED wall sconce adds a clean, refined look to your space.

    • Frosted acrylic shades.
    • Brushed nickel finish.
    • Energy efficient LED.
    • Color temperature 3000K / Color Rendering Index(CRI) 90.
    • Approx. 50,000-hours of lighting.
    • Dimmable.
    • Can be installed vertically and horizontally.
    • Compatible Dimmer switches sold separately: Lutron -DVCL-153P / Lutron -MACL-153M / Lutron PD-6WCL / Lutron -CTCL-153PDH-WH / Lutron -TGCL-153PH-WH / Leviton -R62-06674-P0W / Eaton -AAL06-C1 / Leviton-R12-06672-1LW / Leviton-R50-IPL06-10M / Eaton-SAL06P-LA-K.
    Green checkmark of qualityEvery item checked for quality
    $99.96 $54.98

  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • Rino-Tuff Universal Fit Weight Absorbing Flex Trimmer Strap for Grass String Trimmer, Blower or Sprayer

    The Universal Flex Strap by Rino-Tuff is a comfortable bungee trimmer strap with an adjustable shoulder pad that distributes weight evenly over your back and legs. The quick connecting clip makes it easy to attach the strap to any trimmer, blower, or sprayer. The clip houses a built-in trimmer line cutter and a slot with ear plugs. The bungee strap helps extend your reach while the thick shoulder pad absorbs the shock felt while trimming. With less weight on your body, you can trim for a longer amount of time and reduce muscle fatigue. That means cutting more with less strain to get the job done faster, leaving you more time to do the things you want.

    • Fits all trimmers, blowers, and sprayers.
    • Reduces strain and muscle fatigue.
    • Thick adjustable shoulder pad.
    • Quick and easy connecting.
    • Built-in line cutter and slot with ear plugs.
    Green checkmark of qualityEvery item checked for quality
    $14.96 $8.23
X