Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 15

Showing 127–135 of 260 results

Filters

  • HALO 4 in. 3000K White Integrated LED Recessed Ceiling Light Retrofit Trim Deep Baffle for Low Glare Title 20 Compliant

    Halo RL4 Deep Baffle Series consists of a deep regressed baffle retrofit LED Module-Trim for 4 in. aperture recessed housings. The RL4 Deep Baffle Series is designed for use with compatible 4 in. housings: Halo, All-Pro and others. RL4 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. For further value the RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.

    • Title 20 compliant, can be shipped to California locations.
    • ENERGY STAR qualified for energy conservation and savings up to $583 savings over the life of the fixture.
    • Includes black and white baffle attachments, extra regression for better glare control.
    • Fixture is built to last with maintenance-free energy efficient LEDs with 70,000-hours of life (equivalent to 32-year of life at 6-hours per day or 64-year at 3-hours per day), eliminating your need to use and replace bulbs.
    • White baffle provides good brightness at 681 Lumens to provide illumination to any room, great for 8 ft. to 10 ft. ceilings.
    • Compatible with most 4 in. housings but are best with Halo H995, E4, H99 and H245 series models.
    • 90 CRI title 24 compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Wet rated, can be used in shower and outdoor light applications.
    • Produces light equivalent to a 65-Watt bulb yet uses just 8.5-Watt.
    • Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
    • E26 Edison screw base adapter for retrofit into existing incandescent bulb 4 in. housings.
    • Mountable using friction blades (included).
    • Rated for use with IC and non-IC rated housings.
    • 3000K soft white color temperature provides a friendly and inviting atmosphere, works well throughout the house especially in living rooms, bathrooms, hallways and bedrooms.
    Green checkmark of qualityEvery item checked for quality
    $27.47 $15.11

  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Single Stainless Steel Handmade Kitchen Sink – TR424522

    Brand: Modern National.

    Configuration: Top Mount or Undermount.

    Material: 304 Grade Stainless Steel.

    Dimensions: 16 1/2 in. x 17 3/4 in. x 9 in.

    Green checkmark of qualityEvery item checked for quality
    $154.55 $85.00

  • Clopay Garage Door Rear Track Hanger Kit

    The Clopay Rear Track Hanger Kit allows for garage door track to be securely mounted to your garage ceiling. It comes as a kit with all the parts you need to assemble the rear track hanger. Works on most residential applications.

    • Can be used on garages with up to 2 ft. of headroom.
    • Galvanized construction for durable and long lasting performance.
    • Pre punched holes allow easy attachment to ceilings with various joist spacings.
    • Durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29

  • BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • BELL N3R RAYNTITE Aluminum Gray 2-Gang Weatherproof Electrical Outlet Cover for GFCI Outlet and Toggle Switch, Flip Lid

    Bell RAYNTITE device covers designed to provide weatherproof protection for an outdoor receptacle. RAYNTITE covers are self-closing. Padlockable and mounts to a box or device.

    • Model # 5043-0.
    • Rugged die-cast aluminum construction.
    • State-of-the-art powder coat finish provides maximum weatherability and scratch resistance.
    • Installation hardware, gasket and multilingual instructions included.
    • Toggle and GFCI.
    • Vertical mount.
    • NEMA 3R rated.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • 1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow

    The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.

    • Enables a 90 degree change of direction in a run of EMT conduit.
    • Made of galvanized steel for corrosion resistance.
    • UL and CSA Listed.
    • Large radius allows for easy wire pulling.
    Green checkmark of qualityEvery item checked for quality
    $12.27 $6.75

  • Apollo 1/2 in. and 3/4 in. PEX-B SS Sleeve Tool

    The ApolloPex Combo PEX Stainless Steel Sleeve Tool is a 2-in-1 tool designed to secure 1/2 in. and 3/4 in. stainless steel sleeves (not included) into place within PEX piping systems. There are no loose components, jaws to change, or adjustments to be made to create either size connection. Connections may be checked for security using the Go/No-Go Gauge (included). The ApolloPex system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Designed for use with 1/2 in. and 3/4 in. stainless steel sleeves (not included).
    • Creates a secure dual crimp at each connection.
    • Contoured, comfort-grip handles accommodate gloved and bare hands.
    • Hardened steel construction ensures reliability and durability.
    • Factory calibrated to ensure proper connections right out of the box.
    • Smooth actuation mechanism allows secure connections with minimal force required.
    • Secures sleeves into place with dual crimping action.
    Green checkmark of qualityEvery item checked for quality
    $59.38 $32.66

  • Residential Duty 3-1/2 x 3-1/2 Hinge – 1/4 in. Radius Corner – Lacquered Oil Rubbed Bronze

    • Manufacturer: SGS/EL & EL Wood Products.
    • Style: Traditional.
    • Type: Butt hinge-1/4 in. radius.
    • Material: Steel.
    • Color/Finish: Bronze/oil rubbed.
    • Size: 3-1/2″ x 3-1/2″.
    • Width: 3-1/2″.
    • Residential Weight hinges warranted for life of the opening.
    • Does Not Include Wood Mounting Hardware.
    Green checkmark of qualityEvery item checked for quality
    $5.87 $3.23
X